Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
October 27th, 2008, 09:42 AM   #1
Senior Member
 
Joined: Sep 2003
From: USA,Eugene, Oregon

Posts: 121
Thanks: 0

I Ride:
stator removal

I have a 2001 fx-650. I am removing stator to have it rewound but dont know how to remove stator from sidecover. I removed bolts figured it would come out without too much effort. Any advice appreciated.
wooleyberger is offline  
 
October 27th, 2008, 10:02 AM   #2
Senior Member
 
Joined: Sep 2006
From: Hayle Cornwall

Posts: 987
Thanks: 22

I Ride:
Re: stator removal

Originally Posted by wooleyberger
I have a 2001 fx-650. I am removing stator to have it rewound but dont know how to remove stator from sidecover. I removed bolts figured it would come out without too much effort. Any advice appreciated.
Hi Wooley,

Once you have removed the three screws that secure the stator in the case, just tap the case on the corner of a wooden bench rotating the case as you do so, with the open part of the cover facing away from you. The shock should loosen it, some times there is a bit of corrosion where the stator seats on the flange.

Regards

Sparks.
sparks is offline  
October 27th, 2008, 11:35 AM   #3
Senior Member
 
Joined: Sep 2003
From: USA,Eugene, Oregon

Posts: 121
Thanks: 0

I Ride:
Thanks Sparks. That thing was really stuck on there, I ended up tapping on cover with wooden handle of a hammer. I hope to be sending this stator your way later today.
wooleyberger is offline  
October 27th, 2008, 12:17 PM   #4
Senior Member
 
Joined: Sep 2005
From: Michigan

Posts: 494
Thanks: 0

I Ride:
If your lamination ID is corroded, before you put it back in, take some fine emery cloth and clean up the lamination ID's. Mine was a pain too, after I cleaned it up, it was a breeze.
kzoo is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
removal, stator



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
New stator and rewound stator eon Electrical 19 April 7th, 2013 08:27 PM
stator or fuel issue? i thinks stator.. Bergini Electrical 20 April 24th, 2012 04:48 AM
startermotor removal fastedy1 Mechanical 6 March 25th, 2008 02:34 PM
stator fitting husa -99? and ktm stator? johane82 Electrical 1 March 27th, 2006 03:26 AM
Shock Removal tip... ajt Suspension 0 October 25th, 2004 10:29 PM


Facebook Twitter Google+ RSS Feed