Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
November 13th, 2006, 09:44 PM   #1
Senior Member
 
Joined: Sep 2006
From: townsville australia

Posts: 174
Thanks: 0

I Ride:
fly wheel replacement

okey dokey after spending mass amounts of cash ($704) on a stator I found it came with a fly wheel. Does this really need replacing as I haven't had any issues over the last weekend (10 hours of riding).

I also have a problem with my headlight. There's no power getting to it. The switch is clean and working but I have no power before the switch. Get this the horn works tho. Over a few jumps I noticed that the headlight would flash on but go out a second later. I have searched for loose conectors and broken wires but cant find anything.

Any ideas peoples?
ferret is offline  
 
November 13th, 2006, 10:55 PM   #2
Senior Member
 
Joined: Nov 2003
From: The Netherlands

Posts: 108
Thanks: 0

I Ride:
No, the flywheel doesn't need replacing. I always try to buy the stator without the rest and get a refund. Often it will save half the amount of money.

Seems your headlight is a typical wiring problem....

Good luck.
Cheesehead is offline  
November 14th, 2006, 09:37 PM   #3
Senior Member
 
Joined: Sep 2006
From: townsville australia

Posts: 174
Thanks: 0

I Ride:
I just hooked the headlights to the ignition switch so as soon as the key is turned they are on. It'll get me outa trouble for now.
ferret is offline  
November 15th, 2006, 05:42 AM   #4
Junior Member
 
TightCannon's Avatar
 
Joined: Aug 2005
From: Brisbane Australia

Posts: 11
Thanks: 0

I Ride:
hey ferret what model berg is yours,
do you still have your flywheel
TightCannon is offline  
November 15th, 2006, 08:49 AM   #5
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,380
Thanks: 394

I Ride: Husaberg FE501e 2003
that flywheel is VERY important. only last night there was a post about the magnet falling out and last week there was a pohoto of a disintergrating one as well as a thread on the entire subject of flywheels falling apart.

ferret, get with the programme!!!!! and thank your lucky stars that you have a second chance NOT to be stupid.

regards

Taffy
Taffy is offline  
November 15th, 2006, 12:33 PM   #6
Member
 
Joined: May 2003
From: UK

Posts: 93
Thanks: 0

I Ride:
I don't think the magnets fall out but what does happen is if the main bearing on that side fails, you have stator to rotor interface which destroys both Happened to my 470 and my 650 before i got it
spiney is offline  
November 15th, 2006, 12:38 PM   #7
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,380
Thanks: 394

I Ride: Husaberg FE501e 2003
mine fell out. it does happen, sorry! they loosen and rub and if your lucky you catch them.

regards

taffy
Taffy is offline  
November 17th, 2006, 01:27 AM   #8
Member
 
Husa_Busa's Avatar
 
Joined: Aug 2004
From: Kristinehamn, Sweden

Posts: 32
Thanks: 0

I Ride:
My flywheel also failed. The whole magnet pack loosened from the aluminium case and started to rotate inside it, just some few degrees, but clearly it would have caused serious damage if i have continued to use it. (FE501-02)

/Christer
Husa_Busa is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
fly, replacement, wheel



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
need replacement engine dminto69 Husaberg 1 June 4th, 2012 02:20 PM
Tire to tire / Wheel to Wheel start, motorcycle/dirt bike ninayu61 Tech 5 November 21st, 2011 04:00 PM
3 wheels on my...2 wheel ok! 1 wheel on ..... Taffy Mechanical 7 August 13th, 2008 02:36 AM
Front wheel spacer width? 501E with SM wheel gg Wheels and Tires 5 March 27th, 2008 03:13 PM
con rod replacement oyk Mechanical 0 January 14th, 2006 10:07 AM


Facebook Twitter Google+ RSS Feed