Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
March 19th, 2006, 09:36 AM   #1
Junior Member
 
gassa's Avatar
 
Joined: Mar 2006
From:

Posts: 2
Thanks: 0

I Ride:
Can i use old flywheel and new stator.

Hello.

My bike is Husaberg 550 Fxe 2001

My bike broke down almost 1 year ago in wery wet competition. I was able to get it runned by pulling it by car:-/ But it ran to hot and with explotions.

i have tryed everything and after reading these pages i bougth stator but not flywheel ( long story ). But no changes.

1. Do i have to buy it in pares?
2. How can find out if the CDI box is broken.

please help.


Gisli Arnar Gudmundsson
gassa is offline  
 
March 19th, 2006, 10:32 AM   #2
Senior Member
 
JoeUSA's Avatar
 
Joined: Jun 2001
From: Pasadena Ca.

Posts: 1,355
Thanks: 0

I Ride:
Re: Can i use old flywheel and new stator.

Originally Posted by gassa
Hello.

My bike is Husaberg 550 Fxe 2001

My bike broke down almost 1 year ago in wery wet competition. I was able to get it runned by pulling it by car:-/ But it ran to hot and with explotions.

i have tryed everything and after reading these pages i bougth stator but not flywheel ( long story ). But no changes.

1. Do i have to buy it in pares?
2. How can find out if the CDI box is broken.

please help.


Gisli Arnar Gudmundsson
Hello Gisli Arnar Gudmundsson,

1. You do not have to buy it in pairs. If you bought the correct SEM stator, you can use it with your old flywheel. Check your flywheel to make sure there are no cracks in the epoxy bonding the magnets in place.

2. Install the new stator and start the bike. If you have trouble, download the 'Hardstart Trouble Shooting Guide', there is a section in it evaluating the SEM ignition system that includes measuring the high voltage output of the CDI box.

You will find the Guide in 'Downloads' /'Parts Manuals' (second page under manuals).

Save it to your computer and print it out.

Let us know how it goes.

Remember to properly position the stator in the cover for correct igniton timing. This is explained in your Workshop Manual under the 'Alternator and Ignition" section.

Regards,

Joe
Attached Files
File Type: pdf Pages 11 from WorkShop Manual 1999.pdf (1.06 MB, 39 views)
JoeUSA is offline  
March 20th, 2006, 08:37 AM   #3
Senior Member
 
Joined: Dec 2004
From: Bend, Oregon

Posts: 453
Thanks: 0

I Ride:
Re: Can i use old flywheel and new stator.

F.W.I.W I am using the old stator with a new flyweel without a problem.
BendBerg is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
flywheel, stator



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
stator or fuel issue? i thinks stator.. Bergini Electrical 20 April 24th, 2012 03:48 AM
Mx flywheel-->'normal' stator ElSnorro Mechanical 2 June 1st, 2009 09:41 AM
FLYWHEEL COVER THAT THE STATOR MOUNTS IN 05/fe450husaberg Electrical 3 September 26th, 2008 01:09 AM
Does a -02 stator and flywheel fit a -00? Bultaco Electrical 2 October 9th, 2007 02:05 PM
stator fitting husa -99? and ktm stator? johane82 Electrical 1 March 27th, 2006 02:26 AM


Facebook Twitter Google+ RSS Feed