Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more

LinkBack Thread Tools Display Modes
January 7th, 2022, 03:39 AM   #1
Junior Member
Joined: Jan 2022
From: South Australia

Posts: 1
Thanks: 0

I Ride:
2010 Berg fe450 troublesome start

Hi everyone,

I have a FE450 and just wondering if anyone has had a similar issue as me. Rode the bike on Wednesday with no problems. Just went to start it now to go for a ride. It has no spark and canít hear the pump prime either. All fuses are good. Battery was a little bit flat would this cause the ecu to cut the spark?

Any help would be appreciated, thanks so much!
Legszevs is offline  
January 9th, 2022, 06:44 PM   #2
Joined: Jul 2020
From: tilba nsw australia

Posts: 56
Thanks: 16

I Ride: Berg TE250 '13- gone!KTM 990SMT- gone! Berg FE570 '12 (my dream bike for years!) TY250 TY175 TY80 ol
If the pump won't prime when you hit the starter, something's up. Put a voltmeter across battery and watch when you hit starter- if it drops below 11v it's probably cactus. Invest in Lithium, you'll never use lead acid again.
rikschipp is offline  

  Husaberg Forum > Mechanical and Technical > Electrical

2010, berg, fe450, start, troublesome

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
2004 FE450 E-start low crank and no start votkarel Mechanical 15 May 30th, 2021 01:59 AM
2010 FE450, won't start, help please ashtrans Husaberg 10 March 10th, 2021 09:03 AM
Want To Buy: Berg 2010-11 FE450 Aftermarket Seat High Road Want To Buy 0 February 12th, 2020 04:54 PM
Fe450 2010 slow cranking no start when hot finders Mechanical 12 May 6th, 2019 12:19 PM

Facebook Twitter Google+ RSS Feed