Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Thanks Tree3Thanks
  • 2 Post By Taffy
  • 1 Post By Taffy
Reply
 
LinkBack Thread Tools Display Modes
May 10th, 2021, 06:33 AM   #1
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,539
Thanks: 619

I Ride: Husaberg FE501e 2003
Ohms reading; Stator 1989-1998

Where can i find the readings I should be getting on the early stators? I know that it has to be 1,750 red to black and 23 ohms green to black but I need to see it written down by the factory?

cheers

Taffy
Taffy is offline  
 
May 11th, 2021, 08:32 AM   #2
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,423
Thanks: 231

I Ride: whatever is closest to the garage door
assuming you mean pre '99, i don't havea service manual earlier than that.
ned37 is offline  
May 11th, 2021, 08:53 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,539
Thanks: 619

I Ride: Husaberg FE501e 2003
strange isn't it. the first 7 years and no service manual.....

cheers

Taffy
Taffy is offline  
May 12th, 2021, 12:31 PM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,539
Thanks: 619

I Ride: Husaberg FE501e 2003
Now I didn't know that there was one but someone in Sweden told me today that there is a `1998 Workshop manual. Armed with this info i looked through my stockpile and about 8" from my right foot are sat two of them!

So I'm going to try and get Zaga back invoolved and scan it up into a PDF document.

cheers

Taffy
Taffy is offline  
May 12th, 2021, 12:31 PM   #5
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,539
Thanks: 619

I Ride: Husaberg FE501e 2003
Now I didn't know that there was one but someone in Sweden told me today that there is a `1998 Workshop manual. Armed with this info i looked through my stockpile and about 8" from my right foot are sat two of them!

So I'm going to try and get Zaga back involved and scan it up into a PDF document.

cheers

Taffy
Thanks from jampe and Rainerio
Taffy is offline  
May 14th, 2021, 08:25 AM   #6
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,423
Thanks: 231

I Ride: whatever is closest to the garage door
geez, if all you wanted was affirmation of the readings from 98 down, i could have sent you a picture of the wall scribbles in my garage. written by the factory. certified.
ned37 is offline  
May 14th, 2021, 11:56 AM   #7
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,539
Thanks: 619

I Ride: Husaberg FE501e 2003
LOL! just what I thought; ned's been certified!

regards

Taffy
Thanks from ned37
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
ohms, reading, stator



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
No more cheap KTM stator for 1998? FirstEliminator Electrical 2 January 4th, 2016 09:35 AM
Want To Buy: 1998 FC501 Stator Travmister9 Want To Buy 1 August 24th, 2015 02:34 AM
1998 FC400 stator rrich224 Electrical 6 March 1st, 2011 09:32 AM
1999 fc501 no spark, cdi ohms out ok ralphg Electrical 1 September 19th, 2010 10:13 AM
OIL PRESSURE READING ? BITE-ME Mechanical 1 April 15th, 2008 12:11 AM


Facebook Twitter Google+ RSS Feed