Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
March 10th, 2021, 04:05 AM   #1
Junior Member
 
Joined: Mar 2021
From: Busko

Posts: 6
Thanks: 0

I Ride:
turn signals husaberg fe 450 2009

Hello,

I need info or a photo where to connect the turn signal cables, because I have a switch, but the previous owner took off the lamps. I have LED indicators and a flasher, but I don't know where to connect it. Husaberg fe450 2009

Thanks in advance and best regards friends
MichalPoland is offline  
 
March 10th, 2021, 01:20 PM   #2
Senior Member
 
Rainerio's Avatar
 
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 1,155
Thanks: 264

I Ride: 8 Berg’s 2005-2011 3 Husky’s 1986&7 2021 TE300 2009 Buell & 2006 Ducati
Wires should be running thru the rear fender
Rainerio is offline  
March 11th, 2021, 03:56 AM   #3
Junior Member
 
Joined: Mar 2021
From: Busko

Posts: 6
Thanks: 0

I Ride:
the board mounting is removed, no cables are visible. And where to connect the front turn signals?
MichalPoland is offline  
March 11th, 2021, 02:43 PM   #4
Senior Member
 
webmonstro's Avatar
 
Joined: May 2016
From: Portugal

Posts: 136
Thanks: 24

I Ride: Husaber FE 400 E 1998, Suzuki DR 350 SE 1998, XT 350 1992
There should be two small plugs where the turn signals should connect. right side close to the frame number



Nuno
webmonstro is offline  
March 11th, 2021, 11:05 PM   #5
Junior Member
 
Joined: Mar 2021
From: Busko

Posts: 6
Thanks: 0

I Ride:
Webmonstro, each front turn signal to a separate plug? And how to connect the indicator light that signals the direction on the steering wheel? And where is the flasher?

thank you friend
MichalPoland is offline  
March 12th, 2021, 11:38 PM   #6
Member
 
Joined: Jun 2019
From: G

Posts: 35
Thanks: 4

I Ride: FE 570 2012, 690 SMC 2010
You need this extension cable for the rear indicators.
Itís connection splits for the two indicator and is plugged in into a connector
Close to the battery. Itís tugged in between the battery holder and the subframe

Part number for the rear flasher harness: 81211081000


Kind regards
Chris
MountainBerg is offline  
March 15th, 2021, 01:48 AM   #7
Junior Member
 
Joined: Mar 2021
From: Busko

Posts: 6
Thanks: 0

I Ride:
https : // i . ibb . co / VLTxxV3 / 20210313 - 113205 . jpg

I found 3 cables under the seat, does anyone know which one for what?

Last edited by MichalPoland; March 15th, 2021 at 03:43 AM. Reason: LINK
MichalPoland is offline  
March 15th, 2021, 01:50 AM   #8
Junior Member
 
Joined: Mar 2021
From: Busko

Posts: 6
Thanks: 0

I Ride:
<a href="https://ibb.co/rQH33kv"><img src="https://i.ibb.co/VLTxxV3/20210313-113205.jpg" alt="20210313-113205" border="0"></a>
MichalPoland is offline  
March 15th, 2021, 04:42 AM   #9
Member
 
Joined: Jun 2019
From: G

Posts: 35
Thanks: 4

I Ride: FE 570 2012, 690 SMC 2010
The cable for the flasher harness was under the fuse box.
So basically on the Right side of the bike. I had to use some
Needle nose Pliers to get the plug up from down there.

On the left side, thereís the cable connector for the rear taillight
MountainBerg is offline  
March 16th, 2021, 12:26 AM   #10
Junior Member
 
Joined: Mar 2021
From: Busko

Posts: 6
Thanks: 0

I Ride:
And that big plug in the middle, and the one tied with tape on the right?
MichalPoland is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
2009, 450, husaberg, signals, turn



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear Turn signals on Husaberg FE 390 2011 Juan Ruiz Electrical 1 May 20th, 2014 09:34 PM
turn signals monkimagic Electrical 7 November 17th, 2009 02:44 PM
LED Turn Signals HeyJohnnyPark Electrical 7 July 29th, 2009 06:37 AM
turn signals on the 07 drgnrydr Husaberg 3 February 20th, 2007 06:00 PM
Turn signals.... ezrider Electrical 1 November 20th, 2006 06:04 PM


Facebook Twitter Google+ RSS Feed