Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
August 15th, 2020, 12:37 AM   #1
Junior Member
 
Joined: Jan 2018
From: Italy

Posts: 9
Thanks: 1

I Ride:
Exclamation FE 501 2000 (not electric) No spark after rebuild

Hi everyone,

i just finished rebuild the engine, mounted on frame.

I'm not getting spark at all.
Changed spark with a new one but nothing.

Tests:

Stator resistance Red Black 3 Kohm
Stator resistance Black green 160 Omh

Spark cable resistance on pipe 9 Kohm

VAC when kick starting 40

Ignition Key resistance ON 0 Ohm OFF 138 Ohm




Before the rebuild the bike was running.

What can i do?
Attached Thumbnails
FE 501 2000 (not electric) No spark after rebuild-mvimg_20200815_091411.jpg  

Last edited by Spectre889; August 15th, 2020 at 12:39 AM.
Spectre889 is offline  
 
August 15th, 2020, 12:48 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,336
Thanks: 556

I Ride: Husaberg FE501e 2003
did you try kicking with the HT cable end just 10mm from a cylinder nut? if nothing, I suspect your I.M

Taffy
Taffy is offline  
August 15th, 2020, 01:20 AM   #3
Junior Member
 
Joined: Jan 2018
From: Italy

Posts: 9
Thanks: 1

I Ride:
Yes i tried but nothing, can i ship the module to you so you can verify it on another berg?
if it's faulty i'll buy a new one.
Spectre889 is offline  
August 15th, 2020, 01:33 AM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,336
Thanks: 556

I Ride: Husaberg FE501e 2003
yes, please do.

is it the 5 or 7 wire type? electric start or kickstart?

Taffy
Taffy is offline  
August 15th, 2020, 05:51 AM   #5
Junior Member
 
Joined: Jan 2018
From: Italy

Posts: 9
Thanks: 1

I Ride:
5 wire type, kickstart.
Spectre889 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
2000, 501, electric, rebuild, spark



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2000 fe 501 no spark -not electric start- jakederoche Electrical 13 November 4th, 2014 12:29 AM
No spark after rebuild Djb New Users 13 May 21st, 2014 04:58 AM
Electric start FE400E 2000 Tsounas Mechanical 6 March 24th, 2011 09:09 AM
fitting electric start on 2000 fe 501 beachchef26 Husaberg 1 May 18th, 2007 12:16 AM


Facebook Twitter Google+ RSS Feed