Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Thanks Tree3Thanks
  • 1 Post By Alan
  • 1 Post By proflow
  • 1 Post By proflow
Reply
 
LinkBack Thread Tools Display Modes
September 10th, 2018, 11:29 PM   #1
Senior Member
 
Joined: Feb 2018
From: Roy, WA

Posts: 130
Thanks: 16

I Ride: 08' FE 450 Husaberg
08' FE 450 W/ aftermarket street conversion.

The way I bought this bike was a converted FE 450 to a plated bike. I like the LED turns & tail light, but not so much the controls. So, I have a complete 06' FE 650 harness including all sensors etc. Id like to implant this factory harness & switches to my bike & keep the led stuff. Does anyone know if this is plug & play such as ignition etc ? I know the LED stuff will need me to solder/shrink wrap, possibly diodes right ?
Eventually I will have my dropped valve 650 built to drop in this bike. Wondering whats ahead of me in advance !

Thanks---Proflow
Attached Thumbnails
08' FE 450 W/ aftermarket street conversion.-wiring-harness-swap-1.jpg   08' FE 450 W/ aftermarket street conversion.-wiring-harness-2.jpg   08' FE 450 W/ aftermarket street conversion.-wiring-harness-3.jpg   08' FE 450 W/ aftermarket street conversion.-wiring-harness-swap-4.jpg   08' FE 450 W/ aftermarket street conversion.-wiring-harness-swap-5.jpg  


Last edited by proflow; September 11th, 2018 at 11:10 PM.
proflow is offline  
 
September 11th, 2018, 09:53 PM   #2
Senior Member
 
Joined: Feb 2018
From: Roy, WA

Posts: 130
Thanks: 16

I Ride: 08' FE 450 Husaberg
I gutted the aftermarket street wiring kit off my bike today & just barely started lacing the factory wiring from an 06' SE 650. I did knotice a small plastic box in the aftermarket harness that says it was for the led lighting. Wonder if I can use this ? I suspect it has to do w/the flasher. The gutting of wiring was supposed to be in this post , sorry

Thanks in advance---Proflow

Last edited by proflow; September 11th, 2018 at 11:06 PM.
proflow is offline  
September 12th, 2018, 02:20 AM   #3
Senior Member
 
Alan's Avatar
 
Joined: Jul 2016
From: Australia, Beechworth, Vic.

Posts: 436
Thanks: 221

I Ride: when I can which isn't often enough. FX450, FE570
Can you implement this “box” into the new harness? If so I’d run it for the led indicators. If not it’s not a big job to convert to LED anyway.
Thanks from proflow
Alan is offline  
September 12th, 2018, 03:12 PM   #4
Senior Member
 
Joined: Feb 2018
From: Roy, WA

Posts: 130
Thanks: 16

I Ride: 08' FE 450 Husaberg
OK, thank you, and I'll likely let ya folks know in just a few days
Thanks from Alan
proflow is offline  
September 14th, 2018, 02:57 PM   #5
Senior Member
 
Joined: Feb 2018
From: Roy, WA

Posts: 130
Thanks: 16

I Ride: 08' FE 450 Husaberg
Alan,

I getting ready to solder/shrink wrap the front and rear LED turn signals.

can you line me out on what I need to do before I go too far ?

Im not seeing how that other flasher box is going to play out.

Thanks---Proflow
proflow is offline  
September 16th, 2018, 10:09 PM   #6
Senior Member
 
Joined: Feb 2018
From: Roy, WA

Posts: 130
Thanks: 16

I Ride: 08' FE 450 Husaberg
Awesome, today I was able to finalize all electrical including that "led flasher box". Everything is working properly. Today was a great day . Back bled the brakes to have front & rear pressure switches activate, all good ! Tomorrow all electrical gets soldered & shrink wrapped w/factory connections This is turning out nice
Moved the needle one clip to enrichen the mid as it used to kinda fall on its face a bit .
Soon will be a runner for sure !

Proflow
Thanks from tourist
proflow is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
450, aftermarket, conversion, street, w or



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
FC->FE Conversion OddCoffee Electrical 1 April 17th, 2017 07:32 AM
380 conversion caseyjones Mechanical 8 June 21st, 2009 12:13 PM
Street conversion, now electrical gremlins. lendaddy Electrical 21 November 8th, 2006 10:26 AM
'05 FS650C Street Conversion Motodude Husaberg 6 August 17th, 2006 08:34 PM
2000 fe600e sm conversion ? and info on making street legal 1st00fe600 SuperMoto 2 July 5th, 2006 06:23 AM


Facebook Twitter Google+ RSS Feed