Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
March 21st, 2018, 12:17 PM   #1
Junior Member
 
Joined: Nov 2017
From: Oxford UK

Posts: 2
Thanks: 0

I Ride:
2010 FE450 - dead ECU?

I was out riding, heard a bang, thought "that doesn't sound good" and then about 5 minutes later the bike ground to a halt and has not started since. I've tested the electrical system. The stator, R/R readings were Ok and the ignition coil worked fine on another bike but there is no power from the ECU to the coil, suggesting that something in the ECU has blown. What can I do with an ECU that seems to have gone bang?

Can it be repaired? If so where and how much?

If not, where can I get a replacement for sensible money?

All thoughts appreciated.
Vince van der Funk is offline  
 
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
2010, dead, ecu, fe450



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2010 450FE completely dead; will not start, can't bump either xepikx Electrical 0 October 8th, 2017 11:27 AM
2010 FE450 - low hrs w/extras! BarkSlayer Marketplace 0 June 15th, 2012 12:08 PM
My bike is dead but not dead!! ian748 Mechanical 13 November 14th, 2010 07:43 AM
My first ride on my FE450 2010 anthony_1978 Ride Reports 3 October 26th, 2010 01:06 PM
2010 FE450 FS svpowers Husaberg 0 August 24th, 2010 08:25 AM


Facebook Twitter Google+ RSS Feed