Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more

LinkBack Thread Tools Display Modes
January 9th, 2018, 09:39 PM   #1
Junior Member
Joined: Mar 2017
From: New Zealand

Posts: 20
Thanks: 7

I Ride: 2007 FS550E Supermotard
Trailtech Vapor cutting out

Hi all, hoping someone can point me in the right direction here.

My Trailtech Vapor dash seems to cut out intermittently. The unit loses all power and goes blank and then powers up again a second or two later. Total elapsed hours and odometer reading survives, thankfully, but all other readings reset to 0.

I *seems* to only happen when the bike's been taken out for a brisk ride and when I roll off the gas and 'coast' a bit in a high gear with lowish revs. It doesn't always do it but it doesn't ever seem to happen when I'm really giving it stick.

Any ideas?

This may help. For whatever reason, the unit's backlight does not illuminate when the key is turned 2 clicks to the right. However, it does illuminate if, after starting the bike with the key at 2 clicks, I then turn the key back to the left 1 click. In this position the backlight works, but it also results in the indicators flashing a lot faster than normal. On a side note, what's the difference/reason for the two 2 positions (other than off).
Eucl1d is offline  

  Husaberg Forum > Mechanical and Technical > Electrical

cutting, trailtech, vapor

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trailtech Vapor - settings for FE650 ? FlatTrack Electrical 2 October 16th, 2014 10:32 AM
Trailtech Vapor on husaberg 650 2002 hultz Electrical 6 June 4th, 2012 12:18 AM
Trailtech Vapor.. SmaRTrxxv Electrical 0 December 26th, 2011 04:46 AM
TrailTech Vapor Digital Gauge Hubs Electrical 6 December 11th, 2009 01:31 PM
Cutting out just a bit? gilgamesh Fuel 33 May 19th, 2007 10:45 AM

Facebook Twitter Google+ RSS Feed