Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
December 2nd, 2017, 06:51 AM   #1
Junior Member
 
Joined: Sep 2011
From: Norway

Posts: 28
Thanks: 0

I Ride:
BA20D bulb holder

I have a Husaberg FE 450 2009.
The light was so bad that I modified the bulb holder to fit a led bulb.
But not without some problems. The low light is ok, but the high light is on top of the threes.

So is there anybody who has a 3D drawing of the bulb holder, because my son has purchased a 3D printer, so if anyone has one, I would like to print one.

Regards

Glenn
Glenn71 is offline  
 
December 3rd, 2017, 01:16 PM   #2
Member
 
Joined: Jul 2016
From: Qc, Canada

Posts: 47
Thanks: 26

I Ride: CBR250 MC22, Aprilia RSV 1000, Husaberg 570 hybrid supermoto/snowbike
I actualy fitted an 55/60w h4 bulb in mine. Just had to chop like 2mm of the flange on each sides. The flange sits perfectly in the headlight. I hold the bulb in with a tiewrap tho...

Having a custom 3d printed part to hold it in is a great idea.
The Benz Master is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
ba20d, bulb, holder


« No spark AGAIN??? | - »

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
'06 FE550 - current through the battery holder. basalt Electrical 0 October 23rd, 2015 10:43 PM
Stubborn Compression Holder 72triple Suspension 7 January 19th, 2015 05:07 PM
Light bulb holder Glenn71 Electrical 7 October 8th, 2014 06:36 AM
clutch holder maicoxx Husaberg 1 August 28th, 2010 11:48 PM
motor repair holder fe600racer Husaberg 7 August 27th, 2009 11:49 AM


Facebook Twitter Google+ RSS Feed