Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
November 25th, 2017, 05:14 PM   #1
Junior Member
 
Joined: Jan 2011
From: Calgary

Posts: 8
Thanks: 0

I Ride: FE 570
Map switch

Hi All, I just bought a JD Jetting map switch for my 2009 Canadian market FE 570. It has 3 position, the instructions say that position one is "Less aggressive power delivery than stock" position 2 is described as "Mildest power delivery" and position 3 is "Standard map used from the factory" . Can anyone confirm this? When I bought the switch I thought that 1 was softer 2 was stock and 3 was a more aggressive curve, which is what I wanted the switch for as it's my snowbike, where as much power as possible is what is required. Thanks,
El Gringo is offline  
 
November 25th, 2017, 11:08 PM   #2
Senior Member
 
Rainerio's Avatar
 
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 831
Thanks: 187

I Ride: 7 Husabergs two FE570S,FS570 FE390/450,07 FE650,05 FE550,2 Husqvarna's 86 WR400,87 510,09 Buell
The switchs I have not a JD. is stock mild and wild. Can’t tell the difference with any of them? Maybe if I was in mud? I have in them 3 My Berg’s 09 FE390 11 FE570 & FS570. Also no difference in mileage? That I can till.
Rainerio is offline  
November 26th, 2017, 01:50 AM   #3
Junior Member
 
Joined: Jan 2011
From: Calgary

Posts: 8
Thanks: 0

I Ride: FE 570
Thanks Rainerio, my switch is also marked stock, mild and wild, it looks to be the same switch as Trail Tech. I was hoping that there was a more aggressive map available but it sounds like that is not the case.
El Gringo is offline  
November 26th, 2017, 02:30 AM   #4
Senior Member
 
Joined: Nov 2011
From: Nordic countries

Posts: 955
Thanks: 405

I Ride: Two FE570 -12
On the 570 the difference between soft and aggresive is sublime. If I forget the aggresive setting on and go for a muddy gnarly track I will notice it after some time as I normally use soft there. So go aggresive on snow, there is a difference but you will probably not notice it in on a snow bike.
Turbo however.... That is what the guys here use for snow bikes!
jon andersson is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
map, switch



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Map Switch andyh450 Electrical 3 November 13th, 2013 05:22 AM
Map switch for 09 570 jessfletcher Electrical 1 September 11th, 2011 08:14 AM
On the fly map switch - DIY ! MexMex Electrical 11 December 6th, 2009 07:42 AM
map switch johny Electrical 4 March 28th, 2009 03:57 PM
Map switch piggd Electrical 10 December 30th, 2008 12:03 PM


Facebook Twitter Google+ RSS Feed