Husaberg Forum

Husaberg Forum (http://husaberg.org/husaberg-forums.php)
-   Electrical (http://husaberg.org/electrical/)
-   -   Diagnostic software for 2010 FE390 (http://husaberg.org/electrical/24707-diagnostic-software-2010-fe390.html)

Adimotor November 24th, 2017 04:05 AM

Diagnostic software for 2010 FE390
 
Hi
Please advise what kind of software you are using to read/clear fault codes from your bike.
I need a software to communicate with a 2010 FE390. Android based software is preferred.


Thank you for your support.

Rainerio November 24th, 2017 09:58 AM

You should be getting flash codes from FI light and the manual will tell what they are..... if you don’t have a manual you can search this site or message someone here can tell you?

jdubb75 November 24th, 2017 10:55 AM

Check this link to a Google Drive folder that has all kinds of Husaberg manuals and more.

https://drive.google.com/drive/folde...jdOeHJ2cDM0dmc

jon andersson November 25th, 2017 01:40 AM

There is a "KTM user setting tool" if you want to read all data from the ECU, as far as I know that is the only tool with software to communicate with the bike. You might need to get the ECU "activated" by a dealer to make it work. I haven't worked with it so this is just hearsay from the interweb.
If not that you have to rely on the fault codes as Rainero pointed out.


All times are GMT -8. The time now is 05:16 AM.

Copyright © 2020 Husaberg Forum. All rights reserved.