Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
October 9th, 2017, 12:16 PM   #1
Junior Member
 
Joined: Jul 2017
From: Slovakia

Posts: 6
Thanks: 0

I Ride:
Husaberg Electric help

Hallo husaberg fans.

I have a problem with electric on my bike Husaberg Fe 501 2000 and i need help.Bike has not spark.I change CDI and Statot too,but still nothing.But there is something which i dont understand.I buy stator with 4 cables- red,green,black,grey and 3cables- blue,yellow,yellow.My question is if i have these type of stator I must have CDI or ICU?
And if I have only CDI can i something change son it,i think plug grey cable maybe on black cable from CDI? Sorrymfor my is electric something crazy.
Thank for everyone help.
Duskyyy is offline  
 
October 10th, 2017, 04:24 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,131
Thanks: 350

I Ride:
hello

stator should always hacve just 6 wires. red, green and black are one family and yellow, yellow and blue are another.

the Ignition Module (CDi) has either 5 wires for kickstart or 7 wires.

5 wires
orange is kill or earth
black is earth from CDi
red, green and black for the stator.

if you have 7 wires it is for the electric start and you'll have:
orange is kill or earth
black is earth from CDi
red, green and black for the stator.
grey wire
white wire

to start the bike fit just red, green, black this si all. then kick very hard with the plug in the cap and laying on the cylinder head (for earthing)

you must kick hard and fast, nt one or other but BOTH!!!

Taffy
Taffy is online now  
October 10th, 2017, 08:37 AM   #3
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,383
Thanks: 247

I Ride: KTM 300 XC
Hi

Here you have the basic

Attached Thumbnails
Husaberg Electric help-elec_2000.jpg  
zaga is offline  
October 11th, 2017, 12:24 PM   #4
Junior Member
 
Joined: Jul 2017
From: Slovakia

Posts: 6
Thanks: 0

I Ride:
I have stator with 7 cables,and resistance are between grey and green 168 ohm.And I have cdi Tm 14-05.It is good combination of stator and CDI? Because I read that grey cable is something like Hi/Low map switch co I can plug in into grey cable from controler or switch on renthal.Simply,you say I musnť plug in this grey cable?
Duskyyy is offline  
October 11th, 2017, 01:00 PM   #5
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,131
Thanks: 350

I Ride:
the stator doesn't have 7 wires. the stator has 6 wires.

the ignition module has 7 wires. yes the grey wire controls Hi/Lo but really, unless you are in deep, deep mud it really is about as much use as tits on a bull!

what is the red to black resistance in ohms? 1750?

Taffy
Taffy is online now  
October 12th, 2017, 10:56 AM   #6
Junior Member
 
Joined: Jul 2017
From: Slovakia

Posts: 6
Thanks: 0

I Ride:
No.Really I have stator with 7wires.Green,black,grey,red - itīs one group of wires on stator and 2yellow and 1 blue wire- itīs another group.Maybe this stator can be some rebulit or something, i dont know.But from stator really go 7 wires.And I donīt understand why is there grey cable. When I measure ohm between cable, ohm between green-black or green red are nothing.But when I measure ohm between Grey cable and green there si 16hm.Maybe it can be something like earth fot pick up coil but I donīt know for sure.
Duskyyy is offline  
October 12th, 2017, 10:57 AM   #7
Junior Member
 
Joined: Jul 2017
From: Slovakia

Posts: 6
Thanks: 0

I Ride:
*168 ohm
Duskyyy is offline  
October 12th, 2017, 10:59 AM   #8
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,131
Thanks: 350

I Ride:
we need a photo but this doesn't sound good. i think it is the wrong stator.

Taffy
Taffy is online now  
October 16th, 2017, 10:57 AM   #9
Junior Member
 
Joined: Jul 2017
From: Slovakia

Posts: 6
Thanks: 0

I Ride:
I solve a problem,grey cable was something like earth for pick up coil,so i plug it with black earth wire into cdi on one black wire and it takes spark,bud now my question is.Now must I do somethinh with idle or mixture screw because bike still not start.
Duskyyy is offline  
October 16th, 2017, 11:14 AM   #10
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,131
Thanks: 350

I Ride:
look at your plug, is it wet or dry?

Taffy
Taffy is online now  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
electric, husaberg



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Current owner of husaberg 450 -06 without electric starter noo4 New Users 9 May 2nd, 2015 01:38 AM
how can i start with electric start to my husaberg 650e naturalturk Tech 2 January 3rd, 2010 11:28 AM
Electric fan for Husaberg FE 650 2002 Finnar Cooling Systems 7 August 26th, 2009 06:08 PM
Electric start on a 550 -02. jampe Electrical 2 October 15th, 2008 12:49 AM
Fit electric starter or not? Sammo Electrical 4 November 14th, 2006 02:26 PM


Facebook Twitter Google+ RSS Feed