Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Thanks Tree1Thanks
  • 1 Post By ede
Reply
 
LinkBack Thread Tools Display Modes
August 26th, 2017, 11:57 AM   #1
Junior Member
 
Joined: Aug 2017
From: United States

Posts: 7
Thanks: 0

I Ride:
Rm stators

Well i had a big ride this weekend. Lost spark last weekend. Paid over night shipping on a rm stator. I wanted to get one from taffmeisters but it would not have been in on time. Rm stator says direct plug and play. Not so much. Soldered my connectors to the new stator and bike fired right up. Now it backfires and wont rev past half throttle. I have a 2000 fe400. They said the part is correct mor my bike. Unable to call them they are closed. Any ideas before i loose my temper? would like to try and ride at least tomorrow. I watched taffys video on timing, timing seems correct but i get a terrible miss at higher rpm. Thanks
dschutt is offline  
 
August 26th, 2017, 01:45 PM   #2
Senior Member
 
Joined: May 2016
From: Portugal

Posts: 110
Thanks: 22

I Ride: Husaber FE 400 E 1998, Suzuki DR 350 SE 1998, XT 350 1992
Try moving the timming one way pt other to see if it improves
webmonstro is offline  
August 27th, 2017, 06:57 PM   #3
Junior Member
 
Joined: Aug 2017
From: United States

Posts: 7
Thanks: 0

I Ride:
Tried that. Definitely better advanced but still not rideable
dschutt is offline  
August 29th, 2017, 10:51 AM   #4
Junior Member
 
Joined: Mar 2017
From: Colorado

Posts: 6
Thanks: 0

I Ride:
Went through all this a year ago, rm stator did same thing was bouncing timing around M 10btdc to 50btdc, finally threw it away and got
One from taffy
Tclark1302 is offline  
August 29th, 2017, 01:18 PM   #5
Junior Member
 
Joined: Aug 2017
From: United States

Posts: 7
Thanks: 0

I Ride:
They said they would send me a new one. Should have got one from him in the first place but i needed it for the weekend. Dont think im riding anytime soon. So you dont think i should spend money on a new cdi/coil?
dschutt is offline  
August 29th, 2017, 11:24 PM   #6
ede
Member
 
ede's Avatar
 
Joined: Jul 2015
From: Germany

Posts: 60
Thanks: 30

I Ride: Husaberg FE 501 2002
I can't say if there is different stator types (RM vs. Electrex). Basically they look very similiar. But when reading forums also other people complain that they couldn't get the timing right and the engine doesn't really rev.

I have an Electrex stator and for me it works (exactly how taffy explained). People who ordered other stators (but similar looking ones) have problems. They only difference I can see is:
  • light vs. dark green color at the coils
  • aluminium plate for the coil mount vs. material like phenolic polymer (don't know what it is exactly)

First picture below shows my Electrex stator, the second one was ordered from TomMotec (german retail), which looks similiar to your RM-Stator. Last pic shows the RM-stator.

Maybe they are really different? Does somebody know more about it?

Ede
Attached Thumbnails
Rm stators-electrex-stator.jpg   Rm stators-tommotec-stator.jpg   Rm stators-rm-stator.jpg  
Thanks from zaga
ede is online now  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
stators



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stators bulgarian Mechanical 2 January 26th, 2011 07:04 PM
SEM stators poisendmind1 Electrical 2 March 17th, 2010 04:59 AM
Stators keep going bad Chasman Electrical 9 December 18th, 2005 10:28 AM
Starters & Stators?? Scully Electrical 51 October 1st, 2004 12:42 AM
SEM Stators rodered Electrical 1 May 28th, 2004 11:36 AM


Facebook Twitter Google+ RSS Feed