Husaberg Forum

Husaberg Forum (
-   Electrical (
-   -   Husaberg fc400 1999 ignition. (

Levshanov37 March 23rd, 2017 12:22 PM

Husaberg fc400 1999 ignition.
2 Attachment(s)
Hi. Tell me please, which ignition module should be installed on husaberg fc400 1999?
Are there analogues?

jampe March 23rd, 2017 11:02 PM


Taffy March 23rd, 2017 11:42 PM


Originally Posted by Levshanov37 (Post 178650)
Hi. Tell me please, which ignition module should be installed on husaberg fc400 1999?
Are there analogues?

that's a weird question and photo? I mean, you have the photos so you have the ignition-right/ so they are correct?

what are we missing?

can you say if you live in Moscow, Russia or Moscow in the USA?

zaga March 24th, 2017 02:50 AM


It might be one FC, but you have the stator and flywheel of the FE.

Not that it makes any difference. :D


Levshanov37 March 24th, 2017 12:18 PM

I'm from Russia. Husaberg got to me without wiring and ignition module. There are a lot of wiring schemes on the Internet, which one do I need to restore?
With or without a battery?
Motorcycle enduro or cross?
In Russia, there are few such old models and there is nowhere to ask ...
I apologize for my English with the dictionary))

Levshanov37 March 24th, 2017 12:46 PM

2 Attachment(s)
I really liked the motorcycle and I want to restore it, make a cross bike.
He has an excellent state of suspension, wheels, seats ... he did not have time to kill)))
For 12 years he stood without movement.
On plastic it is not clear enuro or cross)

Levshanov37 March 24th, 2017 01:05 PM

3 Attachment(s)
Which ignition module is right for me?

Taffy March 24th, 2017 02:41 PM

there is some doubt to me that this is really a 1999? Ned can cast light on it but it may be earlier as it has a bolt on subframe.


we need to see the house on the right hand side of the engine where the ignition must fit. this will help us to help you!



Levshanov37 March 24th, 2017 08:25 PM

3 Attachment(s)
There are difficulties with the translation))
What kind of photos do you need?

Taffy March 25th, 2017 01:07 AM

OK it is 100% a 1999.

1998 would have three bolt holes at 120d around the crankshaft area on the crankcase wall.

2000 has hydraulic clutch.

so 1999 does NOT have the holes on the wall and is the last year of cable clutch.

so you don't want a red coil (i will buy them off you!) you want a black coil. like the one on the left and in the middle two posts up.

the black coils have a code on them starting 250 *** ** so please let me have the code.


All times are GMT -8. The time now is 10:57 AM.

Copyright © 2020 Husaberg Forum. All rights reserved.