Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
June 28th, 2016, 08:54 PM   #21
Senior Member
 
Joined: Jun 2014
From: Victoria, Australia

Posts: 123
Thanks: 2

I Ride:


Does this look good? It is the closest it gets It looks closer than the other one and those are the only 2 teeth it could be
mattwilkinson is offline  
 
June 29th, 2016, 05:01 AM   #22
Senior Member
 
Joined: Oct 2006
From: Vancouver Island, BC, Canada

Posts: 228
Thanks: 38

I Ride:
You got it
c337b is offline  
June 29th, 2016, 07:59 AM   #23
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,349
Thanks: 201

I Ride: '08 HUSKY te610
one thing to keep in mind is that there are two events in play here concerning these marks. the bottom gear will reflect the position of the piston and when it is at true tdc, the twin marks will be in direct alignment with the centers of the crankshaft and the camshaft. proper timing will be achieved when the chain is attached while the camshaft lobes are exactly aligned with the top level of the cylinder ( made easier by later gears having two punch marks to align with). to have the crank mounted balancer in the right place, the single mark on the lower camchain gear (counterbalancer shaft) should be aligned with the twin marks on the crank gear (that's what makes the motor so smooth ;.), and since the crank and balancer gears are the same size, the relationship stays the same as it rotates.
clear as mud, right?
ned37 is offline  
June 29th, 2016, 07:18 PM   #24
Senior Member
 
Joined: Jun 2014
From: Victoria, Australia

Posts: 123
Thanks: 2

I Ride:
Thanks mate, i've managed to get it all back together and topping it up with fluids. It seems to be taking a lot more than 1 litre?

I've probably put 1.25 or so litres in already and it's not really even registering on the window at all... When you pull the motor apart does a lot more oil come out than is meant to come out when you do a change?
mattwilkinson is offline  
June 29th, 2016, 09:53 PM   #25
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,731
Thanks: 456

I Ride: Husaberg FE501e 2003
a litre is the maximum you should need to put in

Taffy
Taffy is offline  
June 29th, 2016, 10:38 PM   #26
Senior Member
 
Joined: Jun 2014
From: Victoria, Australia

Posts: 123
Thanks: 2

I Ride:
Originally Posted by Taffy View Post
a litre is the maximum you should need to put in

Taffy
Another one of my blonde moments where I didn't measure how much i had put in, just wanted to give it a flush out and became concerned when what felt like more than a litre had gone in but it hadn;t

Thanks

It's fully reassembled and somehow is not leaking oil or coolant! Theres a rattle somewhere in the engine which is concerning me but it's probably been there the whole time.
I can't think of anything I could have done wrong, the timing was all correct and all


Maybe I can upload a vid to youtube for you to listen?
mattwilkinson is offline  
July 3rd, 2016, 11:43 PM   #27
Senior Member
 
Joined: Jun 2014
From: Victoria, Australia

Posts: 123
Thanks: 2

I Ride:


Does this sound normal?
mattwilkinson is offline  
July 3rd, 2016, 11:49 PM   #28
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,731
Thanks: 456

I Ride: Husaberg FE501e 2003
there is a tinky noise in the background, not sure what that is?

these videos are really hard to tell what is going on in them?

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
motor, starter



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
starter motor justin123 Mechanical 0 August 12th, 2013 10:14 AM
starter motor?? husaberg2711 Electrical 5 February 3rd, 2011 11:24 AM
starter motor gaz84 Mechanical 2 August 20th, 2008 10:40 AM
Starter Motor fish Electrical 10 February 15th, 2007 06:01 AM
starter motor petbro1 Mechanical 11 April 15th, 2005 11:35 PM


Facebook Twitter Google+ RSS Feed