Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
April 5th, 2015, 03:55 PM   #1
Junior Member
 
Joined: Mar 2015
From: Kansas

Posts: 7
Thanks: 0

I Ride: 2010 FE450
Thumbs down 2010 FE450 Charging Problem??

So I have a new to me 2010 FE450, it only has about 17hrs on it, bought it with just over 14hrs.

Today, I took it out for a long ride with some buddies and started having trouble getting it started.

It seemed like the battery was dead, I would hit the button and it would turn over once and quit, or just click. A bump start would get it back on its way. This issue was very hit and miss though. Sometimes I could start it up 3-4 times and it would be fine, then others it would just click.

So fast forward, I get it back home and hook a volt meter up to check my voltages, and it seems like the stator/regulator is not putting out adequate voltage. Static battery voltage is around 12.2. At idle its around 12.3-4, higher RPM I can get maybe 12.5-6v out of it. So it seems to be a stator issue at this point.

Anyone have specs on how to test the charging system components? Seems weird that I would have stator issues on this bike with such low run time.

Thanks in advance
fishheadback is offline  
 
April 5th, 2015, 04:14 PM   #2
Senior Member
 
Joined: Jul 2011
From: vermont

Posts: 189
Thanks: 31

I Ride: 2011 fe390
I assume you already you checked to see if the terminals are tight...
fe390vt is offline  
April 5th, 2015, 04:36 PM   #3
Junior Member
 
Joined: Feb 2012
From: Overland Park, Kansas

Posts: 16
Thanks: 8

I Ride:
Originally Posted by fishheadback View Post
So I have a new to me 2010 FE450, it only has about 17hrs on it, bought it with just over 14hrs.

Today, I took it out for a long ride with some buddies and started having trouble getting it started.

It seemed like the battery was dead, I would hit the button and it would turn over once and quit, or just click. A bump start would get it back on its way. This issue was very hit and miss though. Sometimes I could start it up 3-4 times and it would be fine, then others it would just click.

So fast forward, I get it back home and hook a volt meter up to check my voltages, and it seems like the stator/regulator is not putting out adequate voltage. Static battery voltage is around 12.2. At idle its around 12.3-4, higher RPM I can get maybe 12.5-6v out of it. So it seems to be a stator issue at this point.

Anyone have specs on how to test the charging system components? Seems weird that I would have stator issues on this bike with such low run time.

Thanks in advance
Search this forum for my thread on my FE570S. I see you are from Kansas, as am I. PM me and we can chat after you read the thread. I have new spare parts that we can use to help you eliminate suspect components.

Here's the thread:2011 FE570S Not Charging - need suggestions please!

Last edited by Captain Kirk; April 5th, 2015 at 04:38 PM.
Captain Kirk is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
2010, charging, fe450, problem, rectifier, regulator, stator



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Strange problem with one shim on a 2010 FE450 zimi Mechanical 6 February 2nd, 2015 03:45 AM
charging system help fe450 2010 Russ1 Electrical 0 December 29th, 2014 02:18 PM
GAS-LEVEL SENSOR problem on 2010 FE450 bobbex Electrical 6 January 17th, 2011 04:05 AM
charging problem dirtworker Electrical 14 December 28th, 2008 07:47 AM
charging problem davidhusa Electrical 1 October 21st, 2007 06:55 AM


Facebook Twitter Google+ RSS Feed