Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more

LinkBack Thread Tools Display Modes
February 23rd, 2015, 03:54 PM   #1
Junior Member
Joined: Jan 2015
From: Canberra, Australia

Posts: 22
Thanks: 6

I Ride: 2013 FE 350
2013 FE 350 warning globe problem

Hi Guys

I have recently bought a second hand 2013 FE 350 and am in the process of getting it ready for road registration. I love the bike and am so glad I went Berg instead of KTM.

The headlight fuse shorts out whenever the high beams are switched on. I have identified the problem as being the connectors for the high beam warning lamp on the dash.

The connectors had been damaged by the previous owner and as a result, touch each other even when the globe is installed. The connectors are in a black rubber plug which itself plugs in to the indicator lamp area on the dash.

I have tried to source a new black rubber plug with connectors to replace the damaged one, but have been quoted $99 as the plug is apparently only sold as part of a complete headlight wiring harness.

I'd rather not pay $99 for the harness (which is the same as one from a KTM 350 EXCF) and am considering soldering the globe directly to the wires.

Any help locating the rubber boot/plug or an alternative solution would be greatly appreciated.
bombers18 is offline  

  Husaberg Forum > Mechanical and Technical > Electrical

2013, 350, globe, problem, warning

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
2013 FE501 or 2013 EXC500 shoey85 Husaberg 7 February 8th, 2013 05:51 PM
2013 KTM 350exc SIX DAYS vs 2013 HUSABERG vs 2013 CRF X bontoa Husaberg 3 September 27th, 2012 08:53 AM
Anyone using a 55/60 Globe in headlight? birdwoodburg Electrical 3 February 21st, 2009 07:42 AM
A warning.......... Husaberg_sTaV Husaberg 11 February 18th, 2009 10:38 PM
Warning Signs narkotik666 Mechanical 9 April 23rd, 2007 05:14 AM

Facebook Twitter Google+ RSS Feed