Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Thanks Tree3Thanks
  • 1 Post By spanner
  • 1 Post By LeDelmo
  • 1 Post By jon andersson
Reply
 
LinkBack Thread Tools Display Modes
February 21st, 2015, 10:06 AM   #1
Junior Member
 
Joined: Sep 2011
From: Norway

Posts: 28
Thanks: 0

I Ride:
Building new headlight Husaberg FE 450

I was looking at this light 18w LED Work Light Tractor offroad led drive light Truck Motorcycle SUV ATV fog 12v spotlight External Light Save on 27w 20w-in Lights & Indicators from Automobiles & Motorcycles on Aliexpress.com | Alibaba Group

And I wonder witch light pattern/beam I should get.
The two I can selcet are:
Lightpattern: Spot beam: 8 degree
Light way: strong and far

Lightpattern: Flood beam: 90 degree
Light way: wide flood

I will use this with the Skene IQ-175 Intelligent Lighting Controller.
Skene IQ-175 Intelligent Lighting Controller (smart dimmer) | MondoMotos Motorcycle Lighting, LED Lighting and Accessories

I will cut my own holder and frame til this light.

But I don't know if I should get 8 degree strong and far or 90 degree wide flood!?!

Any input would be nice!

Regards
Glenn71 is offline  
 
February 21st, 2015, 04:05 PM   #2
Senior Member
 
Joined: Sep 2007
From: ???

Posts: 782
Thanks: 291

I Ride:
Something in between would be better, not much help I know.
Thanks from Glenn71
spanner is offline  
February 21st, 2015, 05:27 PM   #3
Senior Member
 
Joined: Feb 2015
From: Minnesota

Posts: 143
Thanks: 8

I Ride: 2011 Husaberg FE570, 2007 Triumph Speed Triple, 2010 Kawasaki Kx450Sm
Have you checked out the Cyclops Penetrator LED 600 and 310? I am planning on replacing my KX's Polisport mmx with the 325. Whats really nice about them is how strong the housing is. Plus, you can mount directly on the handlebars.

The 325 has three LED's with a 25 degree beam pattern and only uses 15W of power "You can also get a 10 degree". The 600 series come with three options. You can do a 10 degree beam, a 25 degree beam or a 25 degree with a 10 degree center. That's allot of light for only 30W.

But, that light dose look interesting. Are you planning on mounting it directly inside you're front number plate? Let me know which route you go I would love to hear the results.
Thanks from Glenn71
LeDelmo is offline  
February 21st, 2015, 07:50 PM   #4
Senior Member
 
Joined: Nov 2011
From: Nordic countries

Posts: 1,073
Thanks: 500

I Ride: 3x FE570
Or go visionX, I have two with different degrees.
2x visionX Soltice as headlamp (pictures)
Thanks from Glenn71
jon andersson is offline  
February 22nd, 2015, 03:19 AM   #5
Junior Member
 
Joined: Sep 2011
From: Norway

Posts: 28
Thanks: 0

I Ride:
I ordered the 90 degree. Not to expensive and I will see how that will work, and then maybe I order 2x visionX if that works better. I have a road legal Husaberg, but the light is crap.

The Cyclops Penetrator LED 600 is to big. But I do like the other options with different degree beam.

I will mount my light inside my front number plate. The light I have now is ok.
I switched to a LED light and my low light is over twice as good as the original. But my high beam will light up the top of the trees. So the LED and the original Husaberg reflector does not fit so good.
Glenn71 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
450, building, headlight, husaberg



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Husaberg fe 550 2008 headlight replace husaBERG Husaberg 3 September 20th, 2014 10:10 PM
Adding headlight/tail light to 2010 husaberg 450 fx dallas31 Electrical 4 May 17th, 2014 06:04 AM
New 2011 & 2012 Husaberg Motorcycle 55 Watt HID Headlight pw_garfield Marketplace 55 June 6th, 2013 09:18 AM
FS: Husaberg Headlight blue mask for FE450 or other LadyBerg Electrical 0 November 26th, 2010 03:00 PM


Facebook Twitter Google+ RSS Feed