Husaberg Forum

Husaberg Forum (http://husaberg.org/husaberg-forums.php)
-   Electrical (http://husaberg.org/electrical/)
-   -   Connectors for TPS and injector? (http://husaberg.org/electrical/17425-connectors-tps-injector.html)

jon andersson March 27th, 2014 06:47 AM

Connectors for TPS and injector?
 
Hi,

Can anyone help me to find extra connectors to the TPS and the injector? I would like to build a small cable so I can check TPS position with a multimeter and another one to connect an injector to a 9V battery. That way it should be easier for me and safer for the bikes connectors.

Do anyone know where I can find them or what serial numbers the connectors have so I can order them?

Thanks.

fe390vt March 27th, 2014 12:15 PM

Re: Connectors for TPS and injector?
 
1 Attachment(s)
here it is...

fe390vt March 27th, 2014 12:17 PM

Re: Connectors for TPS and injector?
 
i took some small needles, soldered them to a couple of small gauge wires and attached them to a voltmeter,( handy homemade tool) and injected them into the cdi box to corresponding tps wire colors.

Davo March 28th, 2014 03:56 AM

Re: Connectors for TPS and injector?
 
I am curious? What can you learn from the voltage on your TPS?

jon andersson March 28th, 2014 04:24 AM

Re: Connectors for TPS and injector?
 
Thank you fe390vt!

Davo; Dial in the TPS for idle. I don't have a problem with it but could be interesting to compare the settings to the manual. I have a special competition ECU map from Ljunggren, so I will not follow the 0.64V advice. My plan is to play around with it and see if I can improve anything and then it's good to have some numbers.

https://www.youtube.com/watch?v=p-EDdAL4Cag

The injector connector is for a 9V battery so I can clean it.

Davo March 28th, 2014 04:38 AM

Re: Connectors for TPS and injector?
 
Interesting YouTube video.
That kind of contradicts the 5 minute or 15 minute "burn in" procedure that was being posted on here a while back.
You would tend to think that the ECU would learn where closed was on the TPS during a "burn in" but apparently not.
Thanks for the info.
Davo

jon andersson March 28th, 2014 09:09 AM

Re: Connectors for TPS and injector?
 
From different google sources (...) I have come to the conclusion that the burn in do jack s**t on a 70 degree.
I have no links to back it up now, but I did read up as much as possible about it when I bought the bike.


All times are GMT -8. The time now is 04:53 AM.

Copyright © 2020 Husaberg Forum. All rights reserved.