Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
May 23rd, 2012, 06:07 PM   #1
Junior Member
 
Joined: Dec 2011
From:

Posts: 3
Thanks: 0

I Ride:
cdi

hello,
have a question on a 1998 fc 400. is the cdi built in the coil pack or is it it,s own unit. i recieved the bike in parts and did not notice one, and are they still available and can i find a picture of one anywhere. thanks to all
joesi is offline  
 
May 23rd, 2012, 08:51 PM   #2
Senior Member
 
Bergini's Avatar
 
Joined: May 2011
From: Wisconsin, U.S.

Posts: 700
Thanks: 3

I Ride: 1995 dakota 408 5spd 8 3/4 rear end
Re: cdi

It is built into the coil, if you have a dark red coil with a red, black, green, and yello wire coming from it (and a plug wire of course) you are good to go, its the whole 2nd half of the ignition system, the only other part other is the stator......
Bergini is offline  
May 24th, 2012, 12:00 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,599
Thanks: 433

I Ride: Husaberg FE501e 2003
Re: cdi

I think he has the later ignition module?

it should be black and have either 5 or 7 wires coming out - the FC had 5. all you need to do as bergini says is connect the stator wires to the coil (ignition module) wires and isolate everything else off/out the way at this point.

look for an I.M. for sale on ebay but it must be from a 400. it can be from any 400 from any year after 1997. iif its black its good but it must be a 400. 2003 was the last year and each year they modified the ignition curve to make them better so if you can find a 2002 or 2003 that would be good!

if yours is kaput - I get them repaired.

regards

Taffy
Taffy is offline  
May 24th, 2012, 05:40 AM   #4
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,386
Thanks: 247

I Ride: KTM 300 XC
Re: cdi

Hi
The original one from 98 should look like this
[attachment=0:1qzdu1j8]SEM_Ignit_MK1.jpg[/attachment:1qzdu1j8]
And there is nothing else, only this

Yes it still can be found


ZAGA
Attached Thumbnails
cdi-sem_ignit_mk1.jpg  
zaga is offline  
May 24th, 2012, 12:42 PM   #5
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,599
Thanks: 433

I Ride: Husaberg FE501e 2003
Re: cdi

I have them for sale!

regards

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
cdi



Thread Tools
Display Modes



Facebook Twitter Google+ RSS Feed