Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
April 27th, 2012, 11:08 AM   #1
Junior Member
 
Joined: Apr 2012
From: Boise, Idaho

Posts: 2
Thanks: 0

I Ride:
CNC bracket for R6 starter upgrade

Sorry to those who are tired of this topic re-surfacing.

However, I picked up an 02 Fe400e for the right price. Then I burned out the starter motor last season. Read the fantastic older threads and docs (thanks to those responsible). So I picked up a newer R6 off ebay because all the 99's were in rough shape. Took the tail piece off the stock starter motor and swapped it out with the newer R6. Then instead of drilling the two new holes in the starter motor, I have a CNC mill and made a new bracket just like the original but .400" wider to accomodate the longer motor. It works awesome.

I was wondering if anyone out there is still dealing with this issue and would be interested in getting one of these brackets? All the leg work is done and if anyone is interested in this path I would be more than willing to hook them up.
Jc65nogo is offline  
 
June 8th, 2012, 02:31 PM   #2
Senior Member
 
Joined: Feb 2009
From: Birdwood South Australia

Posts: 274
Thanks: 15

I Ride: 70 degree fe450 2012 & Aprilia Dorsoduro
Re: CNC bracket for R6 starter upgrade

Have any pictures???? and a price????
birdwoodburg is offline  
September 1st, 2012, 11:50 AM   #3
Junior Member
 
Joined: Apr 2012
From: Boise, Idaho

Posts: 2
Thanks: 0

I Ride:
Re: CNC bracket for R6 starter upgrade

Here are some pictures of the starter motor swap with an 06 starter I bought of ebay then changed the tail piece with the stock and then i machined the replica bracket .400" thicker than the original.

http://s858.photobucket.com/albums/ab14 ... %20Bergie/

I could make a bracket for about $25 plus shipping for anyone interested.
Jc65nogo is offline  
October 25th, 2012, 02:49 PM   #4
Junior Member
 
Joined: Nov 2010
From: Los Angeles

Posts: 27
Thanks: 0

I Ride:
Re: CNC bracket for R6 starter upgrade

Would this bracket fit a 2006 650? If so I would be interested.
wheelieon is offline  
April 28th, 2014, 08:40 PM   #5
Junior Member
 
Joined: Apr 2014
From: Silverton, Oregon

Posts: 2
Thanks: 0

I Ride:
Originally Posted by Jc65nogo View Post
Sorry to those who are tired of this topic re-surfacing.

However, I picked up an 02 Fe400e for the right price. Then I burned out the starter motor last season. Read the fantastic older threads and docs (thanks to those responsible). So I picked up a newer R6 off ebay because all the 99's were in rough shape. Took the tail piece off the stock starter motor and swapped it out with the newer R6. Then instead of drilling the two new holes in the starter motor, I have a CNC mill and made a new bracket just like the original but .400" wider to accomodate the longer motor. It works awesome.

I was wondering if anyone out there is still dealing with this issue and would be interested in getting one of these brackets? All the leg work is done and if anyone is interested in this path I would be more than willing to hook them up.
I have 2006 FE650. I would like to get one of your starter brackets for the R6 starter, alan 503-409-4946
biggie593 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
bracket, cnc, starter, upgrade



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Relocation Bracket... Does this look right? brandonB1 SuperMoto 0 January 9th, 2011 05:18 PM
broken bracket squizz Mechanical 2 April 13th, 2009 04:36 PM
Starter motor bracket Freaky Mechanical 0 January 24th, 2009 04:19 AM
Starter and battery upgrade but still won't start? Freaky Mechanical 13 September 25th, 2008 11:53 AM
PowerCell's custom starter bracket husabutt Electrical 3 April 14th, 2007 02:45 PM


Facebook Twitter Google+ RSS Feed