Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
December 26th, 2011, 04:40 AM   #1
Junior Member
 
Joined: Nov 2011
From:

Posts: 26
Thanks: 0

I Ride:
Mapping switch

I've seen allot of discussion here and other web sites about the mapping switch.
Some are at a difference of how it works.

My question is:
If the bike has the dealer installed competition map and no map switch is it in the more Agressive mode, (the same as with the switch and set to the Agressive setting.

Or, does the map switch in its most Agressive setting actually make the bike more Agressive then the same bike without the map switch?

If it matters e bike is a 2011 FE 390.


Thanks and Merry Christmas to all !!
odonnks is offline  
 
December 26th, 2011, 05:26 AM   #2
Senior Member
 
Joined: Nov 2011
From: Nordic countries

Posts: 1,074
Thanks: 500

I Ride: 3x FE570
Re: Mapping switch

As the map-switch changes the ignition timing it affects whatever injection map you have installed.

So to answer your questions:
The ignition is still in normal mode even if you have the comp map installed in your 390. If you add a map-switch you can then make your bike more aggressive if you like, or more tame, as you then can adjust the ignition.
jon andersson is offline  
December 26th, 2011, 06:32 AM   #3
Junior Member
 
Joined: Nov 2011
From:

Posts: 26
Thanks: 0

I Ride:
Re: Mapping switch

Jon, thanks for the response !

Sounds like I'll need to try one of the switches out.
I'm very happy with the bike now but always like to have the adjustability.
odonnks is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
mapping, switch



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
mapping switch shooter114 Electrical 0 May 10th, 2012 02:37 PM
mapping switch wardy Electrical 13 September 10th, 2011 04:23 PM
Mapping switch GAMS15 Husaberg 6 August 15th, 2010 07:24 AM
Mapping switch review Brendus Electrical 2 July 2nd, 2009 02:45 AM
Mapping Switch? cajuncardude Electrical 3 June 6th, 2008 01:02 PM


Facebook Twitter Google+ RSS Feed