Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
October 10th, 2011, 07:07 PM   #1
Junior Member
 
Joined: Sep 2011
From: New South Wales, Australia

Posts: 15
Thanks: 0

I Ride:
2011 FE 450 Rear Indicator Wiring

I'm looking to identify the plug under the ecu that is for the rear indicators, the previous owner removed them and now I want to put some aftermarket units in.

Normally they would be easy to identify as I would expect a 4 wire plug but I can only see 1 x 3 wire waterproof connector brown/purple/black and a basic dual plug with blue/white & blue black then cable tied next to it is a blue/white joined to blue/white and a blue black joined to blue/black heat shrinked cables.

I'm thinking that these blue pairs are the indicators and that the hard wired are for the fronts which still work fine and the plug is for the rears, can anyone confirm please?

The only other plug i have comes off the rear brake loom and has brown and white and would appear to be a power source for something.
ira11y is offline  
 
October 10th, 2011, 10:02 PM   #2
Junior Member
 
Joined: Sep 2011
From: New South Wales, Australia

Posts: 15
Thanks: 0

I Ride:
Re: 2011 FE 450 Rear Indicator Wiring

I think I found the answer, It seems to be the white waterproof 3 pin plug with the following pin outs....

Black = Right +12V
Purple = Left +12V
Brown = Neutral

Despite showing in the parts guide a 4 pin plug I would say that the Neutral is looped at the back for the split outs on the factory loom.

Hope this helps anyone chasing the same issue.
ira11y is offline  
October 14th, 2011, 12:09 PM   #3
Junior Member
 
Joined: Sep 2011
From: New South Wales, Australia

Posts: 15
Thanks: 0

I Ride:
Re: 2011 FE 450 Rear Indicator Wiring

I found a free online repair manual for 2009 - 2011 for those that are looking for one here's the link

http://annahub.free.fr/husaberg/moteur_ ... 5B1%5D.pdf
ira11y is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
2011, 450, indicator, rear, wiring



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
TE250 2011 wiring diagram Zaphood Electrical 1 May 4th, 2014 07:35 PM
2011 FE390 wiring help doolin64 Electrical 5 March 25th, 2014 07:15 AM
FE 390 - 2011 - wiring diagram rcastro Electrical 0 October 24th, 2012 07:34 AM
2011 fx 450 rear wheel bearings manxrc8 Husaberg 2 July 23rd, 2011 06:40 PM
engear gear indicator wiring ? goatman Electrical 2 May 14th, 2009 10:59 AM


Facebook Twitter Google+ RSS Feed