Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
September 19th, 2010, 06:27 AM   #1
Junior Member
 
Joined: Sep 2010
From:

Posts: 1
Thanks: 0

I Ride:
1999 fc501 no spark, cdi ohms out ok

I just recently bought a 1999 fc501. rode it once, it ran fine, washed and parked. no spark now. cdi ohms out to specs. I've taken the CDI cover off, wire brushed (by hand) the light rust off the stator unit and the flywheel. DOES ANYONE KNOW what the ohm values for the coil? any suggestions...(just have had the bike a month ) I'm new to this (site) 58 years young..mechanic for years, have no husaberg experience (until now). any suggestions are appreciated! bike is great to look at, would look better in the dirt! this bike taxed my ability to get it to kick start it (before the spark failure, left hand kick starter does't help!) the carb is stock. any carb replacement w/hot start feature suggestions?? hellllllp!
ralphg is offline  
 
September 19th, 2010, 09:13 AM   #2
Member
 
Joined: Dec 2009
From: San Francisco CA. USA

Posts: 60
Thanks: 0

I Ride:
Re: 1999 fc501 no spark, cdi ohms out ok

lots post about this
viewtopic.php?f=6&t=11711&start=30

viewtopic.php?f=6&t=4654
Number9 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
1999, cdi, fc501, ohms, spark



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
1999/2000 FC501 Con-Rod bahnsy Husaberg 5 April 3rd, 2012 04:59 AM
Spark Arrestor/Muffler for a 2000 FC501 danielsfc501 Exhausts 2 July 21st, 2009 03:33 PM
2002 501 weak spark or no spark bergtime Electrical 3 December 11th, 2008 02:44 AM
Will 1999 fc 501 wheels fit on a 1999 fe600e? toolmantom Wheels and Tires 2 July 8th, 2008 11:03 PM
Are 1999 Fc 501 wheels and 1999 Fe600 wheels interchangeable toolmantom Husaberg 0 July 8th, 2008 06:17 PM


Facebook Twitter Google+ RSS Feed