Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
January 5th, 2005, 01:21 AM   #1
Senior Member
 
JBSracing's Avatar
 
Joined: Nov 2004
From:

Posts: 158
Thanks: 0

I Ride:
2003 2004 and 2005 rotor/crank.

Can any one tell me if the shaft dimensions and keying on the rotor side of the crank are the same on the 2003 650 as they are on the '04 and '05 bike.

I know that there's been a change in the supplier of rotors/stators has this altered the shaft or keying?

I ask because I am producing a billet stroker crank for a 2003 650 and I would like to know if it will fit a later model.

Thanks for the info guys.
JBSracing is offline  
 
January 5th, 2005, 10:05 AM   #2
Senior Member
 
LINEAWEAVER's Avatar
 
Joined: Jul 2001
From: El Sobrante, Ca. 94803

Posts: 3,249
Thanks: 1

I Ride:
Hi Ben,
Tapers are indeed the same as I belive the keyway location.
No matter really as one may simply rotate the rotor minus the key.

Hope this helps.

Best Regards,
Dale
LINEAWEAVER is offline  
January 5th, 2005, 10:44 AM   #3
Senior Member
 
JBSracing's Avatar
 
Joined: Nov 2004
From:

Posts: 158
Thanks: 0

I Ride:
Thanks Dale.
JBSracing is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
2003, 2004, 2005, rotor or crank



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2003 SEM stator into 2004 Kokusan CDI electrics anthonys4691 Electrical 14 January 15th, 2013 04:30 AM
JUST BOUGHT 2003 FE400E. ARE 2002 OR 2004 PARTS THE SAME???? cerara Husaberg 5 February 2nd, 2007 02:39 PM
FE 550 2003/2004 just bought one, but which one is it?? sixdays Husaberg 4 October 8th, 2006 11:38 AM
2004-2005 differences frank-vls Husaberg 4 November 29th, 2005 05:27 PM
2003 vs 2004 FE650 Reliability doug1 Mechanical 29 October 17th, 2004 02:02 PM


Facebook Twitter Google+ RSS Feed