Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
April 25th, 2010, 04:37 PM   #1
Junior Member
 
Joined: Oct 2009
From:

Posts: 12
Thanks: 0

I Ride:
Spark plug 09 570

Changed this yestereday and it took ages to get it out, i had to move it about 1/8 of a turn at a time with some pointed pliers, please tell me theres an easier way?

I gave the plug a clean and put it back in and now the bike dies when i give it heaps of juice quickly in the shed.
I cleaned the plug with a bit of sand paper, have i stuffed the clearance, are they that sensitive?

It was backfiring a little bit before the plug clean, could this be beacsue the air filter didin't apper to seal properly on one side?
Listerwa is offline  
 
April 25th, 2010, 05:05 PM   #2
Senior Member
 
Joined: May 2009
From: South Island,New Zealand

Posts: 108
Thanks: 0

I Ride:
Re: Spark plug 09 570

I found if you buy a 13mm crescent with the ratchet end,it fits over the, toolkit supplied, spark plug socket end.Then ratchet away,makes plug removal a breeze.
husapye is offline  
April 25th, 2010, 05:28 PM   #3
Junior Member
 
Joined: Oct 2009
From:

Posts: 12
Thanks: 0

I Ride:
Re: Spark plug 09 570

You must have some bloody good riding in NZ, I grew up near Hamilton but am now in Perth WA.
Listerwa is offline  
April 25th, 2010, 06:32 PM   #4
Senior Member
 
Joined: May 2009
From: South Island,New Zealand

Posts: 108
Thanks: 0

I Ride:
Re: Spark plug 09 570

Originally Posted by Listerwa
You must have some bloody good riding in NZ, I grew up near Hamilton but am now in Perth WA.
Yea,I think we are spoilt for extreem terrian,every ride is as much of a challenge as you choose,maybe why Chris Birch and Rory Mead are at the top of extreme enduro, especially here in winter.If I was in Perth I be on the 570 .
husapye is offline  
April 25th, 2010, 08:25 PM   #5
Member
 
Joined: Feb 2009
From: Bulgaria

Posts: 56
Thanks: 0

I Ride:
Re: Spark plug 09 570

Originally Posted by Listerwa
Changed this yestereday and it took ages to get it out, i had to move it about 1/8 of a turn at a time with some pointed pliers, please tell me theres an easier way?

I gave the plug a clean and put it back in and now the bike dies when i give it heaps of juice quickly in the shed.
I cleaned the plug with a bit of sand paper, have i stuffed the clearance, are they that sensitive?

It was backfiring a little bit before the plug clean, could this be beacsue the air filter didin't apper to seal properly on one side?
Put a new spark plug, that's the easiest check for your problem.
sabink is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
570, plug, spark



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Spark Plug Gap fljar Electrical 6 August 29th, 2011 08:09 PM
Spark plug cap paintballwannab Electrical 1 August 10th, 2009 10:02 AM
Spark plug gap pollo Mechanical 2 June 10th, 2008 09:58 PM
One spark plug per ride...? LeFrog Mechanical 14 July 8th, 2005 09:52 AM
Spark Plug?? faktor Husaberg 12 February 15th, 2005 04:48 PM


Facebook Twitter Google+ RSS Feed