Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
February 12th, 2010, 03:37 PM   #1
Junior Member
 
Joined: Jan 2010
From: Boise, Idaho

Posts: 17
Thanks: 0

I Ride:
Wiring of ignition keyswitch

2001 FE501E

OK, I replaced my stator and still no luck .........so, I start poking around and the black and red wire has completely corroded the post off the back of the ignition switch.

After looking around nobody has the correct switch in stock. So I bought a couple of other ignition keyswitches. The original keyswitch had 4 posts:

BROWN - I presume this is ground
ORANGE - looks to go to ignition and light switch
RED/BLACK - Battery
RED/WHITE - Goes everywhere it seems regulator/horn etc...

QUESTION: What has to connect to what for it to be ignition switch in on position? I threw the old corroded one away and the wiring diagram is way too vague.
etcbrown is offline  
 
February 13th, 2010, 12:53 AM   #2
Senior Member
 
Joined: Feb 2009
From: Birdwood South Australia

Posts: 268
Thanks: 7

I Ride: 70 degree fe450 2012 & Aprilia Dorsoduro
Re: Wiring of ignition keyswitch

If the key ignition mine had two yellows pins 3 and four the other one go on the other two pins 1 and 2.
birdwoodburg is offline  
February 13th, 2010, 05:03 AM   #3
Senior Member
 
Joined: Feb 2006
From: Stockholm Sweden

Posts: 185
Thanks: 7

I Ride:
Re: Wiring of ignition keyswitch

Originally Posted by etcbrown
2001 FE501E

OK, I replaced my stator and still no luck .........so, I start poking around and the black and red wire has completely corroded the post off the back of the ignition switch.

After looking around nobody has the correct switch in stock. So I bought a couple of other ignition keyswitches. The original keyswitch had 4 posts:

BROWN - I presume this is ground
ORANGE - looks to go to ignition and light switch
RED/BLACK - Battery
RED/WHITE - Goes everywhere it seems regulator/horn etc...

QUESTION: What has to connect to what for it to be ignition switch in on position? I threw the old corroded one away and the wiring diagram is way too vague.
BROWN and ORANGE should be connected to the to pins that show continuity when ignition is turned off.
(pins 1 and 2 on the switch?)
RED/BLACK and RED/WHITE should be connected to the pins that show continuity after you turned on the ignition.
(pins 3 and 4 on the switch?)
Check out the wiring diagram for the 2003 model, just exchange the colors codes.

regards

Nick
Ghost is offline  
February 13th, 2010, 02:56 PM   #4
Junior Member
 
Joined: Jan 2010
From: Boise, Idaho

Posts: 17
Thanks: 0

I Ride:
Re: Wiring of ignition keyswitch

Ghost,

Thanks for pointing me to the 2003 owners manual for the wiring diagram.
etcbrown is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
ignition, keyswitch, wiring



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Key ignition - what cdi lead to interupt to prevent ignition chilledspode Electrical 7 February 24th, 2007 11:52 AM
Wiring 600 FE '96 OUZO Electrical 11 April 9th, 2006 11:55 PM
fc 470 wiring spenno Electrical 5 September 28th, 2005 03:08 PM
WIRING ANKAN Electrical 0 July 20th, 2005 06:14 AM
DC wiring VIKING Electrical 6 February 3rd, 2005 09:19 PM


Facebook Twitter Google+ RSS Feed