Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more


Reply
 
LinkBack Thread Tools Display Modes
January 22nd, 2010, 10:39 AM   #1
Junior Member
 
Joined: Sep 2009
From:

Posts: 17
Thanks: 0

I Ride:
CDI BOX? GMC HEI??

hey all, its bee a while since ive been on here, but my 1996 501 is still in the garage, torn apart, and not running. No spark..

I have checked out the stator and its good. all my connections and ground are good. I'm thinking its the CDI box that may be defected.. so i was wondering If it was possible to replace it with a GMC HEI unit? I know its a very common ignition unit, in fact Im running one on an old nighthawk i have.

Is there anyone out there that knows where I can get ahold of an electrical schematic for this bike?

I need to get on top of this project, and I may even be jumping the gun posting this, as there are still other things i need to cover on the bike. Like, disconnecting the killswitch.. but i would really like to get that electrical schematic if I can.

Thanks so much.
tysonl33cobb is offline  
 
January 24th, 2010, 08:54 AM   #2
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,326
Thanks: 196

I Ride: '08 HUSKY te610
Re: CDI BOX? GMC HEI??

so i was wondering If it was possible to replace it with a GMC HEI unit?
prolly not, since the hei is a 12vdc system and your bike fires from the stator at around 20vac.
closest thing to a schematic will be found in the '99 owners manual downloaded below. i've used it when i had a '98.
http://www.husaberg.com/fileadmin/user_ ... rGB-99.pdf
ned37 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Electrical

Tags
box, cdi, gmc, hei



Thread Tools
Display Modes



Facebook Twitter Google+ RSS Feed