Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Cooling Systems

Cooling Systems Cooling Systems - Radiators, Water Pumps, Fans, Coolant, etc.


Thanks Tree1Thanks
  • 1 Post By fe390vt
Reply
 
LinkBack Thread Tools Display Modes
July 30th, 2015, 04:18 AM   #1
Junior Member
 
Joined: Oct 2014
From: Hunter Valley, NSW, Australia

Posts: 22
Thanks: 5

I Ride: FE570 - 12
Replacement Rad FE 570 2012

Cracked my LH radiator today.

So.... obviously I'll need to replace it, or both

any suggestion on where I can get hold of some?

Based in Australia but happy to purchase from OS

Cheers Rusty
RustyAs is offline  
 
July 30th, 2015, 06:52 AM   #2
Member
 
Joined: Apr 2013
From: Victoria, BC, Canada

Posts: 48
Thanks: 10

I Ride: 2015 Husky FE350s
Any Husaberg dealer should be able to get these for you. I replaced my right radiator about 6 months ago and it only took a few days to arrive at my local dealer.
hooter is offline  
July 30th, 2015, 02:54 PM   #3
Senior Member
 
Rainerio's Avatar
 
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 809
Thanks: 178

I Ride: 7 Husabergs two FE570S,FS570 FE390/450,07 FE650,05 FE550,2 Husqvarna's 86 WR400,87 510,09 Buell
I've seen aftermarket radiators on EBay don't know how good they are?
Rainerio is offline  
July 30th, 2015, 03:14 PM   #4
Junior Member
 
Joined: Oct 2014
From: Hunter Valley, NSW, Australia

Posts: 22
Thanks: 5

I Ride: FE570 - 12
Originally Posted by Rainerio View Post
I've seen aftermarket radiators on EBay don't know how good they are?
I've seen them as well.
I might give them ago. Just to get me going.
There is a mob from Melbourne that have good feed back.

Pricing seems ok as well

Cheers
RustyAs is offline  
July 30th, 2015, 04:59 PM   #5
Senior Member
 
Joined: Jul 2011
From: vermont

Posts: 183
Thanks: 27

I Ride: 2011 fe390
some ktm rads fit, some u can more or less make fit.
I have a crushed tube on my left rad from hitting the valve cover. It's almost flattened but have been running it for the last 150 hrs w/out issue. think it came off a 450 sxf. (slightly different downtube angle)

been running that same rad with jb weld for the last 40 hrs.

The aftermarket rads are alright, but rad guards don't fit.

On another note, i've seen a safari tank on a ktm 350 rub/wear through the corner of a radiator. plastic beats aluminum, go figure


And finally...some worthless info: a left rad in europe costs over 300 euros new. and that's just a few hours from ktm headquarters.

I would consider having someone at least try to fix it locally... for a spare.
Thanks from Rainerio
fe390vt is offline  
July 30th, 2015, 06:36 PM   #6
Senior Member
 
Rainerio's Avatar
 
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 809
Thanks: 178

I Ride: 7 Husabergs two FE570S,FS570 FE390/450,07 FE650,05 FE550,2 Husqvarna's 86 WR400,87 510,09 Buell
Be careful with any quick fixes of radiators. They will fix a small hole but will also clog other parts of radiators/engine. Used it on my car and heater core slowly got bad (no heat)
Rainerio is offline  
July 31st, 2015, 05:26 PM   #7
Member
 
Joined: Jan 2012
From: Woodside, CA

Posts: 38
Thanks: 5

I Ride: 2010 FE450, 2010 FE450S, 2010 FX450, 2011 FE570SM
Being in Australia makes this a lot more challenging, but here in the states is a company called Myler's Radiators. they can fix quite a bit of damage and for a fraction of replacement cost. They've fixed radiators for me 2-3 times. They are in Utah.

Myler's Radiators, Motorcycle Radiators, Radiator Repair, Radiator Sales, Offroad, ATV, Street, parts, accessories, apparel, service, jacket, glove
ehsan is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Cooling Systems

Tags
2012, 570, rad, replacement



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacement Air filters harikishan7 Tech 0 March 25th, 2014 01:25 PM
Replacement chain for 2012 390? gjws Husaberg 2 September 15th, 2013 08:41 PM
Replacement alloy cap on 09 570 Blueberger Fuel 0 May 21st, 2010 01:03 AM
replacement tailpipe. BigDave Husaberg 1 May 10th, 2006 03:31 PM
con rod replacement oyk Mechanical 0 January 14th, 2006 10:07 AM


Facebook Twitter Google+ RSS Feed