Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Cooling Systems

Cooling Systems Cooling Systems - Radiators, Water Pumps, Fans, Coolant, etc.


Reply
 
LinkBack Thread Tools Display Modes
June 20th, 2014, 01:51 PM   #1
Senior Member
 
Joined: Apr 2014
From: Alameda CA

Posts: 101
Thanks: 10

I Ride: 05 FE 650, 11 FE 570
Oversized water pump shaft seal??

Kawasaki Part#92049-0104

This seal, being used by some as a replacement of the OEM, is double-lipped and 5mm deep vs 4mm of the stock.

Does anyone know if the extra depth of the seal will block off the weep hole inlet?

Thanks.

Steve
sgomes is offline  
 
June 20th, 2014, 04:57 PM   #2
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,868
Thanks: 1212

I Ride: 2008 700FK, 2002 628FST
Ive used a 6mm wide seal sanded to 5mm wide no problems, there is plenty of room between the seals you just need to make sure the impeller is clear on the water side

FWIW i use a 2007 KTM65 seal it seems to be made of a nicer silicone rubber

46035056100
Description: SHAFT SEAL RING 10X18X4
Retail: $9.39
Your Price: $7.51
bushmechanic is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Cooling Systems

Tags
oversized, pump, seal, shaft, water



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water Pump Seal Fix! jlburgess Cooling Systems 35 November 1st, 2017 02:19 AM
Water Pump seal Kit BLUERG Cooling Systems 19 August 24th, 2009 05:19 PM
Water Pump Seal Direction GoldenBoy Cooling Systems 3 July 11th, 2009 10:43 PM
water pump shaft sparks Mechanical 5 January 28th, 2009 10:14 PM
Groove in water pump shaft kzoo Cooling Systems 8 July 23rd, 2007 07:52 PM


Facebook Twitter Google+ RSS Feed