Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Cooling Systems

Cooling Systems Cooling Systems - Radiators, Water Pumps, Fans, Coolant, etc.


Reply
 
LinkBack Thread Tools Display Modes
November 24th, 2013, 03:38 PM   #1
Member
 
Joined: Oct 2013
From: massachussetts

Posts: 50
Thanks: 0

I Ride:
97 fe501e coolant hose id

Anyone happen to know the coolant hose inside diameter on a old 97 fe501e ?
horsinaround is offline  
 
November 24th, 2013, 05:23 PM   #2
Senior Member
 
Bergini's Avatar
 
Joined: May 2011
From: Wisconsin, U.S.

Posts: 700
Thanks: 3

I Ride: 1995 dakota 408 5spd 8 3/4 rear end
Re: 97 fe501e coolant hose id

you can measure the barb it came off of maybe? it might be some weird metric size too, I think I used 1/4 inch? its been a while so I really don't remember....
Bergini is offline  
November 26th, 2013, 01:29 PM   #3
Member
 
Joined: Oct 2013
From: massachussetts

Posts: 50
Thanks: 0

I Ride:
Re: 97 fe501e coolant hose id

I have a trail tech speedo to install and needed the radiator hose id so I could get the correct hose adapter for the coolant temp sensor. I can pull the hose to find out. I just didn't known if anyone knew offhand.
horsinaround is offline  
November 27th, 2013, 07:09 AM   #4
Senior Member
 
Joined: Jun 2001
From: Troutdale, Oregon USA 2005 FE550e

Posts: 1,274
Thanks: 10

I Ride:
Re: 97 fe501e coolant hose id

The coolant hose i.d. is 3/4".

log
logjump is offline  
November 28th, 2013, 07:07 AM   #5
Senior Member
 
Bergini's Avatar
 
Joined: May 2011
From: Wisconsin, U.S.

Posts: 700
Thanks: 3

I Ride: 1995 dakota 408 5spd 8 3/4 rear end
Re: 97 fe501e coolant hose id

ooops I was thinking fuel hose .....I was working on a fuel line that a deer broke when I ran it over on my jeep the night i responded so fuel lines were on my mind lol stupid deer.......I guess you probably know its not 1/4 haha.....its has always been a generalized that its 3/4 hose, if I remember any smaller just wont fit although the 3/4 seems too big and bulges a little as you clamp it down.......
Bergini is offline  
November 28th, 2013, 09:19 AM   #6
Member
 
Joined: Oct 2013
From: massachussetts

Posts: 50
Thanks: 0

I Ride:
Re: 97 fe501e coolant hose id

So if its 3/4 or 19mm is a hair larger, then hopefully I can stretch the hose onto the trail tech coolant temp sensor adapter.
horsinaround is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Cooling Systems

Tags
coolant, fe501e, hose



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
coolant hose diameter MrX Cooling Systems 1 February 19th, 2013 12:01 PM
2002 FE 501e coolant hose blasts off engine block Cooling Systems 7 June 6th, 2011 07:12 PM
Rad hose Badvoc Husaberg 2 February 6th, 2007 10:48 PM
Lower rad. hose vulnerability rancheroracer Husaberg 11 May 31st, 2005 04:04 AM
650 SM Breather Hose ROWLEY Mechanical 1 June 1st, 2004 12:21 PM


Facebook Twitter Google+ RSS Feed