Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Cooling Systems

Cooling Systems Cooling Systems - Radiators, Water Pumps, Fans, Coolant, etc.


Reply
 
LinkBack Thread Tools Display Modes
March 1st, 2011, 09:27 AM   #1
Member
 
Joined: Aug 2010
From: Pennsylvania, USA

Posts: 75
Thanks: 0

I Ride:
Fan Kit - Rubber Boot FE390

When I installed my fan kit, the directions showed a rubber boot that covers the wire connectors on the thermo switch. My kit didnít contain a rubber boot. I just have individual insulators on the spade clips and unprotected lead wires. Did anyone else get a kit without the rubber boot? Thanks.
JohnnyQuest is offline  
 
March 1st, 2011, 11:30 AM   #2
Senior Member
 
Joined: Nov 2010
From: Salt Lake City, UT

Posts: 253
Thanks: 4

I Ride:
Re: Fan Kit - Rubber Boot FE390

Same for me. I suspect they switched to the individual mini-boots to reduce their manufacturing cost. Hopefully it will still work fine.
DeeG is offline  
March 1st, 2011, 12:44 PM   #3
Senior Member
 
Joined: Dec 2010
From: Yorkshire UK

Posts: 271
Thanks: 4

I Ride:
Re: Fan Kit - Rubber Boot FE390

No boot with mine either. Made one from an old bicycle inner tube and a couple of cable ties.
pegscraper is offline  
March 1st, 2011, 01:37 PM   #4
Member
 
Joined: Oct 2010
From: monotown

Posts: 45
Thanks: 0

I Ride:
Re: Fan Kit - Rubber Boot FE390

same here, i used a but if radiator hose/ zip ties
anthony_1978 is offline  
March 2nd, 2011, 09:16 PM   #5
Junior Member
 
Joined: Nov 2010
From: Colorado

Posts: 6
Thanks: 0

I Ride:
Re: Fan Kit - Rubber Boot FE390

Ask your dealer for one of the rubber lever crate protectors off the end of a lever when they uncrate a new Hasaberg. You will need to cut off the angle connectors and use straight connectors. Cut a hole in the small end of rubber cap, push over wire, crimp on new straight connectors, connect to fan switch, push cap on to thermo switch and zip tie if you want. works better then old one that came with kits.
onbarn is offline  
April 18th, 2011, 09:31 PM   #6
Junior Member
 
Joined: Dec 2010
From: australia

Posts: 26
Thanks: 0

I Ride:
Re: Fan Kit - Rubber Boot FE390

yes my kit came with no rubber boot either?
synesthesia570 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Cooling Systems

Tags
boot, fan, fe390, kit, rubber



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
inlet manifold rubber 650 hultz Mechanical 19 August 28th, 2012 01:38 AM
inlet rubber stopped Taffy Fuel 7 March 9th, 2012 09:20 AM
450 Rubber carbi intake boot cure fe600racer Mechanical 0 October 10th, 2010 07:55 AM
Rubber in my sump Husabergh Mechanical 10 September 3rd, 2008 07:39 AM


Facebook Twitter Google+ RSS Feed