Husaberg
Go Back   Husaberg Forum > Buy and Sell > Classifieds

Classifieds Buy, Sell, Trade - Private sales only


Thanks Tree2Thanks
Reply
 
LinkBack Thread Tools Display Modes
December 11th, 2016, 09:44 PM   #1
Member
 
Joined: Jul 2016
From: Qc, Canada

Posts: 31
Thanks: 6

I Ride: CBR250 MC22, Aprilia RSV 1000, KTM 505 Snowbike/supermoto
Husaberg 570 2011 engine parts + some other bits

Hi guys

Short intro, i bought the bike cheap with dropped valves to do an engine swap so i'm selling off the bits i won't need for my swap.

Crankshaft + balancer shaft (needs rebuild, bent rod) SOLD
cyl head core (needs major repair, valve seats, guides and all. Dropped both exhaust valves) 40$
alternator cover + stator + rotor 150$
Starter + gears + one way clutch 150$
Engine cases 200$
Clutch cover + water pump 100$
clutch assembly 200$
transmission assy 200$
ECU SOLD
Throttle body without injector 100$
Front fender and lateral pannels, Blue SOLD
Plastic skidplate 30$
Headpipe, looks brand new, original owner had a race exhaust put on the bike before leaving the showroom floor 150$
Mid pipe 150$
Clutch master cyl+slave, complete assy, 200$

I'll do good deals if you buy a few items. Don't be shy to make an offer


Possible to trade, i'm also looking for some parts...

-I'd like a set of black plastics, so rear fender and rad shrouds, new or used in ok condition. For the other plastics KTM stuff fits so it's easy to find.
-I'd like a spare fuel tank
-I'd like a low seat as i'm pretty short
-I'll need a rear shock so i can swap easily between supermoto and Snowbike set-up
-KTM LC4 rear caliper + bracket (or some other bike with caliper on the left) because my new engine has the drive chain on the right and OEM caliper does not work on LH side.


Thanks guys
Call or txt me at 819-699-9803
I'm located in Quebec, Canada but I can ship worldwide at buyer's expense of course.

Oh yeah, the pictures








And just cuz i like to show off my projects, here it is with the new engine from a Can-am DS450. Still lots of work to be done before i have a driveable bike tho.

Last edited by The Benz Master; December 13th, 2016 at 10:20 AM.
The Benz Master is offline  
 
December 12th, 2016, 04:03 AM   #2
Junior Member
 
Joined: Nov 2016
From: Massachusetts

Posts: 5
Thanks: 0

I Ride:
Engine cylinder for sale.
Massholejim is offline  
December 12th, 2016, 06:50 AM   #3
Junior Member
 
Joined: Nov 2016
From: Massachusetts

Posts: 5
Thanks: 0

I Ride:
Sorry I was in a rush is cylinder for sale? Your bike looks factory made so far did you make the pipe?
Massholejim is offline  
December 12th, 2016, 12:11 PM   #4
Member
 
Joined: Jul 2016
From: Qc, Canada

Posts: 31
Thanks: 6

I Ride: CBR250 MC22, Aprilia RSV 1000, KTM 505 Snowbike/supermoto
Cylinder cracked a little when valves dropped. it might work if you have the crack welded, remachined and then replated/sleeved. I can give it to you for 10$ + shipping, just to pay for the trouble of packing and dropping it at the post office.

If you buy something else i'll throw it in for free.

Thanks, that's exactly the plan. I want it to look like it was built like that from factory. Got the new frame craddle mandrel bent and welded it in the factory castings where the old tubes were for a perfect fit. yup, headpipe is home made too with mandrel u bends. Right now it's just fitted there and holds with tape. I just have to weld it now, waiting to receive a new manifold flange from laser cutting to do that.
The Benz Master is offline  
December 12th, 2016, 02:39 PM   #5
Member
 
RogerB39's Avatar
 
Joined: Oct 2011
From: Pacific Northwest

Posts: 40
Thanks: 6

I Ride: FX450 (supermoto and offroad)
By any chance, are you selling the EFI voltage regulator?

Thanks
RogerB39 is offline  
December 12th, 2016, 04:57 PM   #6
Member
 
Joined: Jul 2016
From: Qc, Canada

Posts: 31
Thanks: 6

I Ride: CBR250 MC22, Aprilia RSV 1000, KTM 505 Snowbike/supermoto
Originally Posted by RogerB39 View Post
By any chance, are you selling the EFI voltage regulator?

Thanks
That would be the ECU or the voltage regulator? i was thinking to keep the voltage regulator because it's really fit around the forks and the can-am regulator won't fit. ECU, Jim has dibs on it, i'll let you know if it does not fall trough.

Thanks
The Benz Master is offline  
December 13th, 2016, 08:38 AM   #7
Member
 
RogerB39's Avatar
 
Joined: Oct 2011
From: Pacific Northwest

Posts: 40
Thanks: 6

I Ride: FX450 (supermoto and offroad)
Originally Posted by The Benz Master View Post
That would be the ECU or the voltage regulator? i was thinking to keep the voltage regulator because it's really fit around the forks and the can-am regulator won't fit. ECU, Jim has dibs on it, i'll let you know if it does not fall trough.

Thanks
Hey there.
It was the voltage regulator I was after (mounts up at the front of the frame/headstock)
Thanks all the same.
RogerB39 is offline  
January 6th, 2017, 04:20 PM   #8
Member
 
Joined: Jul 2016
From: Qc, Canada

Posts: 31
Thanks: 6

I Ride: CBR250 MC22, Aprilia RSV 1000, KTM 505 Snowbike/supermoto
Bump

Still a bunch of stuff left






The Benz Master is offline  
February 11th, 2017, 08:26 PM   #9
Junior Member
 
Joined: May 2015
From: Sydney

Posts: 2
Thanks: 1

I Ride: hus 570 rxv550
Cylinder

G'Day from Australia,
Do you still have the cylinder for the 570?
If so ,how much delivered to Sydney Australia 2099
Regards,Geof C
firstturnracing@yahoo.com.au
Thanks from husadady
geofie is offline  
February 12th, 2017, 09:10 PM   #10
Member
 
Joined: Jul 2016
From: Qc, Canada

Posts: 31
Thanks: 6

I Ride: CBR250 MC22, Aprilia RSV 1000, KTM 505 Snowbike/supermoto
No sorry. Cylinder was cracked
The Benz Master is offline  
Reply

  Husaberg Forum > Buy and Sell > Classifieds



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: husaberg FE 450 (550-650) 2004-08 engine parts grosso Classifieds 3 February 14th, 2017 05:24 PM
2007 Husaberg FE-650 e6 (USA) - Chassis and Engine Parts Manual bushmechanic Service Manuals 0 April 24th, 2014 08:46 PM
2009 Husaberg FE 570 - Spare Parts Manual: Engine zen Service Manuals 0 April 12th, 2014 06:14 AM
loosing engine oil 2011 husaberg 570 titan Mechanical 3 August 10th, 2012 09:34 PM
650 HUSABERG ENGINE PARTS Chubba Tech 11 August 30th, 2009 07:54 PM


Facebook Twitter Google+ RSS Feed