Husaberg
Go Back   Husaberg Forum > Buy and Sell > Classifieds

Classifieds Buy, Sell, Trade - Private sales only


Reply
 
LinkBack Thread Tools Display Modes
June 29th, 2016, 02:02 AM   #1
Junior Member
 
Joined: Aug 2015
From: Cincinnati

Posts: 12
Thanks: 0

I Ride:
2009/2010 Husaberg FE450/570 Head and Cylinder LOW HOURS

Used Head, Cylinder and piston off a 2010 Husaberg FE450. Very light use on head and cylinder. Under 50 hours of run time. Long story short the motor was built for racing and had a new cylinder and head installed at 50 hours. You are viewing the stock cyclinder and head. One small mark on the head pictured below. I've had a KTM mechanic look these parts over and he didn't find anything wrong with them.
From what I can tell the Cylinder Head will fit the following. Not sure about the cylinder and piston. Please verify serial#'s before you buy.
81236020000 CYLINDER HEAD CPL 2010 FE570
81236020000 CYLINDER HEAD CPL 2009 FE450
81236020000 CYLINDER HEAD CPL 2010 FE450
OEM replacement cost for the following items is...
Cylinder Head $594.71
Cylinder and Piston $798.29
5136387188
$350
Attached Thumbnails
2009/2010 Husaberg FE450/570 Head and Cylinder LOW HOURS-img_0923.jpg   2009/2010 Husaberg FE450/570 Head and Cylinder LOW HOURS-img_0924.jpg   2009/2010 Husaberg FE450/570 Head and Cylinder LOW HOURS-img_0925.jpg   2009/2010 Husaberg FE450/570 Head and Cylinder LOW HOURS-img_0926.jpg   2009/2010 Husaberg FE450/570 Head and Cylinder LOW HOURS-img_0927.jpg  

2009/2010 Husaberg FE450/570 Head and Cylinder LOW HOURS-img_0928.jpg   2009/2010 Husaberg FE450/570 Head and Cylinder LOW HOURS-img_0929.jpg   2009/2010 Husaberg FE450/570 Head and Cylinder LOW HOURS-img_0930.jpg  

Last edited by greghudepohl; July 13th, 2016 at 05:03 AM.
greghudepohl is offline  
 
June 30th, 2016, 03:20 AM   #2
Junior Member
 
Joined: Aug 2015
From: Cincinnati

Posts: 12
Thanks: 0

I Ride:
Still available.
greghudepohl is offline  
July 1st, 2016, 03:15 AM   #3
Junior Member
 
Joined: Aug 2015
From: Cincinnati

Posts: 12
Thanks: 0

I Ride:
Wanting $350 for everything pictured. Make offer.
greghudepohl is offline  
July 2nd, 2016, 11:50 AM   #4
Senior Member
 
Rainerio's Avatar
 
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 823
Thanks: 187

I Ride: 7 Husabergs two FE570S,FS570 FE390/450,07 FE650,05 FE550,2 Husqvarna's 86 WR400,87 510,09 Buell
Can find out what shipping would be to 94110 ? Thanks
Rainerio is offline  
July 5th, 2016, 03:09 AM   #5
Junior Member
 
Joined: Aug 2015
From: Cincinnati

Posts: 12
Thanks: 0

I Ride:
$350 for both.

94110-Based on the UPS ship calculator I believe I can do it for $25. If its less I'll send money back. If its more I'll eat the cost.
greghudepohl is offline  
July 6th, 2016, 05:04 AM   #6
Junior Member
 
Joined: Aug 2015
From: Cincinnati

Posts: 12
Thanks: 0

I Ride:
Still available.
greghudepohl is offline  
July 9th, 2016, 07:38 AM   #7
Senior Member
 
Joined: Oct 2012
From: Belgium brugge

Posts: 716
Thanks: 167

I Ride: bikes
I think the head is slightly different from a 570 compared to a 450 because headers are different part number wil a 570 front header work/fit on a 450 cyl head???
Also the cam is different but pretty sure that wil work
HusaBELGfs570 is offline  
July 9th, 2016, 10:38 AM   #8
Senior Member
 
Rainerio's Avatar
 
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 823
Thanks: 187

I Ride: 7 Husabergs two FE570S,FS570 FE390/450,07 FE650,05 FE550,2 Husqvarna's 86 WR400,87 510,09 Buell
Sent a PM
Rainerio is offline  
July 12th, 2016, 03:14 AM   #9
Junior Member
 
Joined: Aug 2015
From: Cincinnati

Posts: 12
Thanks: 0

I Ride:
Still available.
greghudepohl is offline  
July 13th, 2016, 11:55 AM   #10
Junior Member
 
Joined: Aug 2015
From: Cincinnati

Posts: 12
Thanks: 0

I Ride:
Pending.
greghudepohl is offline  
Reply

  Husaberg Forum > Buy and Sell > Classifieds

Tags
cylinder, head, husaberg, low



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: husaberg 650 cylinder head 2003 grosso Classifieds 0 November 9th, 2014 01:46 PM
For Trade: Looking for a cylinder head, sleve and connecting rod for 2004 fe450 beLIEve Classifieds 1 May 24th, 2014 01:02 AM
2008 Husaberg FE450 Only 14 hours $3995.00 Mark_Donovan Marketplace 6 June 25th, 2011 07:43 AM
Banjo bolt screen on head, 2010 fe450 Chriszeee Mechanical 3 April 29th, 2011 08:47 PM
For Sale: 2010 HUSABERG FX450 TITLED! VERY LOW HOURS mud400 Husaberg 1 December 17th, 2010 12:57 PM


Facebook Twitter Google+ RSS Feed