Husaberg
Go Back   Husaberg Forum > Buy and Sell > Classifieds

Classifieds Buy, Sell, Trade - Private sales only


Reply
 
LinkBack Thread Tools Display Modes
June 5th, 2014, 12:49 PM   #1
HCW
Junior Member
 
Joined: May 2014
From: New Zealand

Posts: 14
Thanks: 1

I Ride: FE450 2008
WANTED, front caliper mount 320mm

Does anyone have a front caliper mount to fit a '08 FE450 with 320mm disc that they want to part with?
HCW is offline  
 
June 7th, 2014, 01:40 PM   #2
Senior Member
 
Joined: Jun 2011
From: Northern California

Posts: 557
Thanks: 115

I Ride:
I have a Braking adaptor that didn't work on my 2005 FE650. It's got POW81 as the part number. Tiny scratches on it by the mounting hole.

I don't recall the particulars. Give me a day or two and I'll see what the deal was with it.

Oh hell, I'll go try it now and see what happens.

It didn't work with a 310mm disc so I went another route.





Idle is offline  
June 7th, 2014, 08:24 PM   #3
Senior Member
 
Joined: Jun 2011
From: Northern California

Posts: 557
Thanks: 115

I Ride:
Ok, here's the deal.

###edit: it may be the case that my "310mm" disc isnt a full 310mm, and that's why it leaves 8-9mm untouched instead of 5mm.

It bolts right up, but locates the pads too far out for my 310 mm braking disc. I marked where the pads touch it on the inside and then measured the distance between that and the inner part of the rotor surface. I got ~9mm of untouched disc.

So, I don't know if it will work. Maybe my disc is actually a bit smaller than 310.

Measuring the untouched part of the disc, it "should" be around 5mm if my math is correct.

The speedo pickup hole is in the right spot, but the magnet hits the bracket. It would need an almost flush magnet to work.

The "other route" a homemade radial bracket I made:



Speedo magnet interference on my Braking 310mm:



My disc:



Bracket mounted up:



And with pads installed:





I forgot to take a pic from the outside, and had already bolted my other brake up before I realized.

Anyway, I think it will work with a 320mm disc, but just that it may leave a few mm of disc on the inside untouched..

Last edited by Idle; June 8th, 2014 at 08:56 AM.
Idle is offline  
July 10th, 2014, 11:51 PM   #4
HCW
Junior Member
 
Joined: May 2014
From: New Zealand

Posts: 14
Thanks: 1

I Ride: FE450 2008
Thanks Idle
sorry I didn't see your reply until just now. I'm still interested in the mount adaptor if you still have it. I'll PM you to get the details.
Cheers.
HCW is offline  
Reply

  Husaberg Forum > Buy and Sell > Classifieds

Tags
caliper, front, mount, wanted



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
radial caliper on standard forkleg mount help?? Blather SuperMoto 8 February 7th, 2014 01:07 PM
6 pot caliper wanted Fezsi Wheels and Tires 2 August 31st, 2012 03:37 AM
1998 fc, 320mm front disc? bergiebearlike Wheels and Tires 3 February 14th, 2009 04:11 PM
Caliper relocation bracket for 320mm rotor and 4 pot brembo fj1200 SuperMoto 0 February 5th, 2009 05:52 PM
320mm brake caliper adapter lost in the mail Mackberg SuperMoto 2 June 2nd, 2006 04:43 AM


Facebook Twitter Google+ RSS Feed