Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Adventure Riding

Adventure Riding Adventure Riding Forum


Thanks Tree3Thanks
  • 2 Post By HusaGeezer
  • 1 Post By TomTom
Reply
 
LinkBack Thread Tools Display Modes
April 3rd, 2019, 11:59 PM   #1
Junior Member
 
Joined: Nov 2018
From: RO

Posts: 1
Thanks: 0

I Ride:
Bike wont start in gear

Hello, y have a 2010 husaberg fe 450 and after the winter my bike is moving forward in first gear when the clutch is pulled and y can started in gear when y press the start button the bike is moving forward with the clutch pulled, y change the oil ( motorex 10w60 ) and y opened the clutch cover y take the plates of and cleaned with breake cleaner, and now the bike ist not moving in gear but y cann started in gear. Any sugestion plis ?

Trimis de pe al meu SM-G935F folosind Tapatalk
sirbsergiu is offline  
 
April 4th, 2019, 10:06 PM   #2
Junior Member
 
Joined: Apr 2016
From: Durango, Colorado

Posts: 21
Thanks: 8

I Ride: Husaberg FE390; Suzuki ATV
My 2011 FE390 is the same. Clutch is "sticky" - but after oil warms up to operating temp it is just fine. I know several others who have the 70 degree Bergs and they are all the same.
When cold, I start in neutral, then give it some throttle BEFORE putting it in first (or it dies).
Also, neutral is a little hard to find - so I often kill the engine then hit neutral when needed. Overall, this well-known "glitch" is an easy work around. Once I got accustomed to the quirk, it never bothers me. Good luck with a GREAT bike! - Husageezer in Colorado.
Thanks from TomTom and sirbsergiu
HusaGeezer is offline  
April 4th, 2019, 10:35 PM   #3
Senior Member
 
Joined: Nov 2012
From: Sweden

Posts: 593
Thanks: 518

I Ride: HB 570 FE
+1 on HusaGeezer. If its just on startup and cold engine its normal.
Another way of separating the plates prior to start is to put a high gear in and with the clutch in roll the bike backwards and they let go (maybe ). Backwards is just because you get good force holding the bars pulling rather than pushing.
The routin I use is much like HG's as Im lazy. Start engine in neutral, with clutch in get the bike rolling a tad over walking pace, put 1:st in, with the clutch still in, blip the throttle and plates will separate.
Thanks from sirbsergiu

Last edited by TomTom; April 4th, 2019 at 10:42 PM.
TomTom is offline  
Reply

  Husaberg Forum > Husaberg Forum > Adventure Riding

Tags
bike, gear, start



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Husaberg fe 650 wont go out of first gear Col022 Mechanical 5 June 25th, 2017 12:17 PM
Bike Wont Start - Confirm on Suspicion? fallenmoons Mechanical 8 May 17th, 2016 09:59 AM
E Start wont turn over why? birdwoodburg Mechanical 3 March 8th, 2009 10:52 PM
wont start when hot I-pity-the-fool Fuel 7 July 26th, 2007 03:43 AM
my bike wont start morpheus Mechanical 20 April 7th, 2007 05:07 PM


Facebook Twitter Google+ RSS Feed